Laserfiche WebLink
PART I <br />Page la of 19 <br />Perms[ No. CO-0000132 <br />A. TERMS AND CONDITIONS <br />1. Effluent Limitations - Discharge points 003, 004, 005, 006, 007, 009 <br />and 010 <br />Beginning immediately and lasting [hrough October 31, 1996, the <br />permittee is authorized to discharge within the limitations specified <br />below, from the following outfall serial numbers (see Figure 1): <br />003, sediment <br />004, sediment <br />005, sediment <br />006, sediment <br />007, sediment <br />009, sediment <br />010, sediment <br />pond outfall <br />pond outfall <br />pond outfall <br />pond outfall <br />pond outfall <br />pond outfall <br />pond outfall <br />to Elk Creek <br />to Elk Creek <br />to Elk Creek <br />to Elk Creek <br />to Hubbard Creek <br />to Elk Creek <br />to Sanborn Creek <br />Parameter <br />30-day avg. a/ Daisy Max. c/ <br />Flow, MGD Report ATA <br />Total Suspended Solids, mg/1 35 70 <br />Total Iron, mg/1 3.5 7.0 <br />Settleable Solids, ml/1 NA Report <br />Total Dissolved Solids, mg/1 NA Report <br />pH (standard units) shall remain between 6.5 and 9.0 c/. <br />Oil and grease shall not exceed 10 mg/1 c/ in nay grab sample nor shall there <br />be a visible sheen f/. <br />Any discharge or increase in the volume of a discharge caused by <br />precipitation within any 24-hour period less than or equal to the <br />10-year, 24-hour precipitation event (or snowmelt of equivalent <br />volume may comply with the following limitations subject to burden of <br />proof requirements described in Part I.A.2. <br />Parameter Daily Maximum c/ <br />Flow, MGD Report <br />Settleable Solids, ml/1 j/ 0.5 <br />Total Dissolved Solids, mg/1 Report <br />pH (standard units) shall remain between 6.5 and 9.0 c/. <br />Oil and grease shall not exceed 10 mg/1 c/ in any grab sample nor <br />shall there be a visible sheen f/. <br />See part I.C. for Footnotes <br />