HYDRO29530

• Permit No: C1980005
• IBM Index Class Name: Hydrology
• Doc Date: 4/14/2006
• Doc Name: 1st Qtr 2006 Inspection Report
• From: Seneca Coal Company
• To: DMG
• Permit Index Doc Type: Sediment Pond Inspections
• Media Type: D
• Archive: No

PERIODIC INSPECTION FORM
Water, Sediment, or Slurry Impoundments//
INSPECTOR'S NAME: Dennis Jones DATE: ~-' -~b ~~,Z6'~S
NPDES I.D. NO.: CO-0000221 D.P. 008
FACILITY CONFIGURATION: Cross-Valley Pond
SITE NAME: Pond #008
MINE NAME: Seneca ZI Mine (Seneca Coal Co)
MINE I.D. NO.: CMLRD Permit No. C-80-005
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
DATE LAST INSPECTION: ~~
LOCATION: SW'/, NWT/., Sec. 7, TSN, R86W
LOCATION: 7.1 mi. SE of Hayden. CO
OWNER'S REP.: Gregg Kitchen, Gen Mar
Circle Or Wrlte In apDrODrlate re6pODBe
Foundation preparation (removal of vegetation, stumps, topsoil: Yes
Lift thickness: 12
Compaction according to approved plan: Yes
Burning (specify extent and location): No
Angle of slope: 3:1 upstream, 3:1 downstream Total = 6:1
*Seepage (specify location, color, and approximate volume)
From underdrain pipes:
At isolated points on embankment slopes:
At natural hillside:
Over widespread areas:
From downstream foundation area:
"Boils" beneath stream or ponded water:
Cracks or scarps on crest:
Cracks or scarps on slope:
Sloughing or bulging on slope:
*Major erosion problems:
Surface movements in valley bottom or on hillside:
*Erosion of toe:
*Water impounded against toe:
Existing embankment freeboard: (normal = 4.7')
Increase Decrease in water level: kt9 c~nFC~~
Cracks, bulging, or erosion on upstream face:
Visible sumps or sinkholes in slurry surface:
*Clogging
Spillway channels and pipes:
Decant system:
Diversion ditches:
*Cracking or crushing of pipes
Spillway pipes:
Decant system:
Trash racks clear and in place:
N A
Yes No N/A
Yes No N/A
Yes No N/A
Yes No N/A
Yes No N/A
Yes No N/A
Yes No N/A
Yes No N/A
Yes No N/A
Yes No N/A
Yes No N/A
Yes No N/A
~Z feet
feet
Yes ®o N/A

Yes No N/A
Yes No N/A
Yes No N/A
*Major adverse changes in these items could cause instability and should be reported to the
Engineering Manager and Mine Superintendent for further evaluation. Adverse conditions noted in
these items should normally be described (extent, location, volume, etc.) in the space on the
back of this sheet.