HYDRO29252 - Laserfiche WebLink

Home Browse Search

hup://www.epa.gov/rzg5oh2o/uic/act_samp.htm • Atthchment I: Formation Testing Program The testing program, if necessary, must be designed to obtain data on fluid pressure, estimated fracture pressure, physical characteristics of the injection zone. The petmittee must notify the UIC Branch at least (30) days prior to any testing and wait for approval. Attachment J: Stimulation Program Outline any proposed stimulation program. Attachment K: Injection Procedures Describe the proposed injection procedures including pump, tank etc. Attachment L: Construction Procedures This should include details of the casing and cementing program, logging procedures, deviation checks, drilling, testing program, and the nature of the annulus fluid. • Surface casing size and weight, setting depth, # of sacks of cement, hole size • Intermediate casing size and weight, setting depth, # of sacks of cement, hole size • Longstring casing size and weight, setting depth, # of sacks of cement, hole size • Size and weight and length of the tubing, • Size and model of the packer and the setting depth For a converted well, [he owner/operator must submit along with the permit application the following information: state completion report, well rework record and cementing tickets for all work done on the well. Attachment M: Construction Details Submit schematic or other appropriate drawings of the surface and subsurface construction details of the well. Include a description of the exact point at which the injection fluid will be sampled. Sample well schematics are shown below. Attachment N: Changes in Injection Fluid Does not apply to Class II injection Wells Attachment O: Plans for Well Failures Outline contingency plans to cope with all shut-ins or well failures, so as to prevent migration of fluids in any USDW. Attachment P: Monitoring Program The monitoring program for this well will consist of compliance with the EPA permit requirements of filing Monthly, Quarterly and Annual reports. Attachment Q: Plugging and Abandonment (P&A) Plan Submit a plan for plugging and abandonment of the well: • All uncemented casing ripped. • Plug of at least 250 feet immediately above the injection zone or • 50 feet of cement immediately above a cast iron bridge plug. 250 feet is required above cement retainer if situated adjacent to the injection zone. • Cement plug set at least 50 feet above and 50 feet below any casing rip point. • If surface casing is not cemented to surface, a cement plug set at least 50 feet below [he lowest ? of 5 5/29/99 1229 PM