|
CAE J
<br />CORE LABORATORIES
<br />DUAL I T Y A S S U R A N C E M E T H O D S
<br />R E F E R E N C E S A N D N O T E S
<br />Report Date: 12/29/98
<br />(1) EPA 600/4-79-020 Methods for Chemical Analysis of Water and
<br />Wastes, March 1983
<br />(2) EPA SW846 Test Methods for Evaluating Solid Waste, Third
<br />Edition, September 1986; Update 1, July 1992; Update 11,
<br />September 1994; Update IIA, August 1993; Update IIB, January
<br />1995; Update III, December 1996
<br />(3) Standard Methods for the Examination of Water and Wastewater,
<br />16th Edition, 1985
<br />(4) Standard Methods for the Examination of Nater and Wastewater,
<br />17th Edition, 1989
<br />(5) Standard Methods for the Examination of Water and Wastewater,
<br />18th Edition, 1992
<br />(b) EPA 600/4-80-032 Prescribed Procedures For Measurement Of
<br />Radioactivity in Drinking Water, August 1980
<br />(7) EPA 600/8-78-017 Microbiological Methods For Monitoring The
<br />Environment, December 1978
<br />(8) Federal Register, July 1, 1990 (40 CFR Part 136)
<br />(9) EPA 600/4-88-03 Methods For The Determination of Organics
<br />Compounds in Drinking Water, December 1988
<br />(10) U.S.G.S. Methods For Determination of Inorganic Substances In
<br />Water And Fluvial Sediments, Book 5, Chapter A1, 1985
<br />(11) Federal Register, June 7, 1991 (40 CFR Parts 141 8 142)
<br />(12) ASTM Section 11 Water and Environmental Technology,
<br />Volume 11.01 Water (1), 1991
<br />(13) Me [hods of Soif Ana(ysis, American Society of Agronomy,
<br />Agronomy No. 9, 1965
<br />(14) ASTM Section 5, Petroleum Products, Lubricants, and Fossil
<br />Fuels, Volume 05.05, Gaseous Fuels, Coal, and Coke
<br />(15) EPA 600/2-78-054 Field and Laboratory Methods Applicable To
<br />Overburdens and Mine Soils, March 1978
<br />(16) ASTM Part 19, Soils and Rocks; Building Stones, 1981
<br />COMMENTS
<br />a) ND = Not detected. NL = No[ calculable due to value(s) lower
<br />than the detection limit.
<br />b) Data in the OA report may differ from final results due to
<br />digestion and/or dilution of samples into analytical ranges.
<br />duality control results are reported "as analyzed" within
<br />the instruments established calibration range.
<br />Page 1
<br />n... ~ ..~~ ~, ~.. ~., .a~ . , ~~ w.. ~.o-,,,..._ a,..,,~..~~.,.............. ~ .....,.,.,~.,,r~„e„ ..o., ~~ m.~.,~ .~, . ~.. a.,,.~~.., ~,.u m,..M... ~,. ~~. ~,~~.. ~, vase, ow,.,. ~ .. o...~.~..~....,,
<br />
|