My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
PERMFILE67239
DRMS
>
Back File Migration
>
Permit File
>
700000
>
PERMFILE67239
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
8/24/2016 11:13:01 PM
Creation date
11/20/2007 9:46:49 PM
Metadata
Fields
Template:
DRMS Permit Index
Permit No
M1977215
IBM Index Class Name
Permit File
Doc Date
8/18/1977
Doc Name
Portion of Application
From
US DEPT OF AGRICULTURE
To
HOMESTAKE MINING
Media Type
D
Archive
No
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
80
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
• z • <br />The front of the pad directly south of the mill facility is very steep <br />and erosion is eviden[ on this bare surface. The materials are quite <br />• varied but generally fine textured in conjunction with large rocks. i <br />Either the angle of. this slope will have to be altered to discourage <br />active rilling and soil loss or some structural amendment such as riprap will <br />have to be constructed. <br />The bulk of area's H, C, and D contain similar soil types. This entire <br />south facing hill is part of the Creede Caldera and most soils on site are <br />volcanic in origin though they may have been transported and reworked <br />alluvially. As materials washed off the hillside to the north, they have <br />been mixed and stratified. Consequently, soils are extremely variable. <br />The organic surface soil is quite thin over most of the area. The A <br />horizon is usually a loam approximately 4 inches thick. Subsoils range <br />from silty sands and sandy clays to silty clays. An unconsolidated coarse ~I <br />grained clayey sand seems to be the most common material. Due to the <br />method of deposition, sand and coarse frequent content will vary i <br />greatly. These fine textured materials have a high moisture holding capacity <br />and therefore can provide stored water for plants. This is probably the ~ <br />reason revegetation efforts on the dam and elsewhere have been so successful <br />despite the dry moisture conJi}~pj5on this southerly aspect. Although ~ <br />these subsoils are only slowly permeable, there is enough sand and gravel in the ~ <br />profile to aid downward drainage and facilitate necessary aeration for ~ <br />plants. <br />Due to the plasticity of these materials, compaction on roadways will be <br />• severe to moderate. In order to restore the original productive <br />capabilities ripping and harrowing will be necessary prior to reseeding <br />to prepare the seedbed. <br />Erosion risk is considered to be moderate in these areas. The hazard <br />is partially offset by the fact that these soils are quite deep and <br />can accommodate large quantities of the water. <br />The successful initiation and perpetuation of vegetation on the actual <br />tailings (areas B and D) involves correcting a number of adverse factors. <br />Wastes usually (1) are deficient in plant nutrients, especially Phosphorus <br />and Nitrogen and (2) have poor soil structure. Lower taster holding <br />capacity than normal turf (due to poor soil structure) and low organic <br />matter content of spoils, together with poor heat and hydraulic <br />conductivity characteristics, provide an environment in which available <br />soil [cater for plant growth is one of the most important limiting factors. <br />These poor soil characteristics are compounded by high radiation loads on <br />this southerly slope andresultant high soil surface temperatures. <br /> <br />- 37 - <br />
The URL can be used to link to this page
Your browser does not support the video tag.