HYDRO28165

• Permit No: C1980005
• IBM Index Class Name: Hydrology
• Doc Date: 9/5/1989
• Doc Name: 3rd Qtr 1989 Inspections
• From: PEABODY COAL CO
• To: MLRD
• Permit Index Doc Type: SEDIMENT POND INSPECTIONS
• Media Type: D
• Archive: No

PERIODIC INSPECTION FORM
Water, Sediment, or Slurry Impoundments
INSPECTOR'S NAME: Dennis J nes DATE: 8/3/89
NPD ES I.D. NO .: ~ - D.P.008
FAC ILITY CONFIGU ~: Cross-Valley Pon DATE LAST INSPEC TION: 5/1 7/89
SIT E NAME: Pond #008 LOCATION:SW'I,NW'/~, Sec. 7, TS~~, R$f;W
MIN E NAME: Seneca one ea oby oa o LOCATION: i. mt. ~~ o ayoen,
MIN E I.D. N .. ermit - ~- OWNER'S R .. on cu tan, ~uot.
Circle or write in appropriate response
1. Foundation preparation (removal of vegetation, stumps, topsoil): _ es No N/A
2. Lift thickness: 12 in. N/A
3. Compaction according to approved plan: ~ No N/A
4. Burning (specify extent and location): Yes No (N~
5. Angle of slope: 3:1 upstream, 3:1 downstream Total = 6:1 N/A
6. *Seepage (specify location, color, and approximate volume)
_ From underdrain pipes: Yes No N/
At isolated points on embanxment s opes: Yes No N/A
At natural hillside: Yes ® N/A
Over widespread areas: Yes o N/A
From downstream foundation area: Yes N/A
"Boils" beneath stream or ponded water: Yes o N/A
7. Cracks or scarps on crest: Yes J~ N/A
8. Cracks or scarps on slope: Yes ~ N/A
9. Sloughing or bulging on slope: Yes ® N/A
10. *Major erosion problems: Yes ~; N/A
11, Surface movements in valley bottom or on hillside: Yes No N/A
12. *Erosion of toe: Yes Lto N/A
13. *Water impounded against toe: Yes ~ N/A
14. Existing embankment freeboard: g.4 feet
15. Increase De_rease in water level: 0 feet
16. Cracks, bulging, or erosion on upstream face: Yes ~ N/A
17. Visible sumps or sinkholes in slurry surface: Yes No N/A
18. *Clogging
Spillway channels and pipes: Yes vo)
Decant system: Yes o
Diversion ditches: Yes No
19. *Crackina or crushing of pipes
Spillway pipes: Yes (P~ N/A
Decant system: Yes o ~
20. Trash racks clear and in place: See comments Yes No N/A
*Major adverse changes in these items could cause instability and should be reported to
the Engineering Manager and Mine Superintendent for further evaluation. Adverse condi-
tions noted in these items should normally be described (extent, location, volume, etc.)
in the space on the back of this sheet.