My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
PERMFILE65702
DRMS
>
Back File Migration
>
Permit File
>
700000
>
PERMFILE65702
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
8/24/2016 11:11:27 PM
Creation date
11/20/2007 9:00:52 PM
Metadata
Fields
Template:
DRMS Permit Index
Permit No
C1981044
IBM Index Class Name
Permit File
Doc Date
12/11/2001
Section_Exhibit Name
EXHIBIT 16 MSHA ROOF AND VENTILATION PLANS
Media Type
D
Archive
No
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
78
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
• I. ROOF CONTROL PLAN <br />This is the minimum roof control plan, which has been formulated for <br />normal roof conditions encountered during development mining at the <br />Eagle ;5 Mine. This plan shall comply with all roof control <br />provisions of 30 CFR 15.200, as well as the Coal Mining Laws of the <br />State of Colorado. <br />This is a combination roof control plan. It is based on the use of <br />either shield supports or roof bolt support. The "Safety <br />Precautions" included in the following pages shall be strictly <br />followed. <br />J. SAFETY PRECAUTIONS FOR MAINTAINING CONVENTIONAL SUPPORTED A <br />This is the minimum roof control plan and was formulated for <br />maintaining areas with normal roof condition which were supported <br />conventionally prior to May, 1985. <br />Permanently supported roof shall be defined as: <br />' 1) All roof between test holes and five (5) feet inby the last <br />test showing a minimum of eighteen (18) inches of head coal and the <br />minimum roof support permanently placed on five (5) foot centers <br />• along the length of entry. <br />OR <br />2) A1] roof which supported by cross bars on five (5) foot <br />centers or their equivalent, or timbers placed five (5) centers <br />across the width and length of the entry, or the five (5) foct span <br />between a timber row and the rib. <br />Also, if areas have been mined where geologic hazards are known to <br />exist, crossbars will be set on (5) foot center through and for (~5) <br />feet on each side of the hazard. This statement restricts all areas <br />mined after February, 1983. <br />K. SAFETY PRECAUTIONS FOR ROOF BOLT SUPPORT <br />1. This is the minimum roof control plan and was formulated for <br />normal roof conditions while using the mining system(s) <br />described. The plan consists of installing bolts on no more <br />than 5-foot centers across the width and length of the entry, as <br />shown in Figure K-1. In areas where subnormal roof conditions <br />are encountered, indicated, or anticipated, the operator shall <br />orovide additional support where necessary. If changes are to <br /> <br />-3- <br />
The URL can be used to link to this page
Your browser does not support the video tag.