Laserfiche WebLink
<br /> <br />a <br />F. GENERAL REQUIRIIiENTS <br />4. Flow Measuring Device <br /> <br />PART I <br />Page 9 of 19 <br />If not already a part of the permitted facility, within ninety (90) <br />days after the effective date of the permit, a flow measuring device <br />shall be installed to give representative values of effluent <br />quantities at the respective discharge points. Unless specifically <br />ezempted, or modified in Part I.B.2 of this permit, a flow measuring <br />device will be applicable at all designated discharge points. <br />At the request of the Water Quality Control Division, or the <br />Environmental Protection Agency, the permittee shall shoe proof of <br />the accuracy of any flow-measuring device used in obtaining data <br />submitted in the monitoring report. The flaw-measuring device must <br />indicate values within ten (10) percent of the actual flow being <br />discharged from the facility. <br /> <br />.~ <br />Code: i - 23 Date: 1-84, revised 12-88 <br />