Laserfiche WebLink
Rule 2: Permits <br />this cut will be pushed or hauled to adjacent valley fills. The contour cuts will be repeated until a <br />core is left in the center of the ridge. Material from these cats will be pushed, cast, or hauled to <br />adjacent areas on the bench of the lowest seam and the outslopes graded to approximate tnal <br />contours. Material from the core will be pushed, cast, or hauled to adjacent areas on the bench. A <br />portion of this material will be rehandled to expose and recover the lower coal seams. When the <br />lowest coal seam is recovered, the spoil on the bench will be pushed with dozers to achieve the <br />final contours and covered with topsoil or suitable material. This process will continue until an <br />east and west face is established on both sides of the ridge. <br />Figure 2.05.3-5 illustrates the location of the temporary office and parts trailers. <br />~~ <br />U <br />r~Fezos-s,wa~zvermrts,ao~ 2.05-Sa (revised 03-IS-02) <br />