Laserfiche WebLink
• Temporary Post Mine Channels <br />T-1, T-2, T-3 (temporary) <br />Permanent Post Mine Channel <br />Lower and Upper Refuse <br />Elk Creek Postmine Channel <br />All diversion ditches aze designed to safely pass the peak Flow From the 10-year, 24-hour storm event. <br />The Elk Creek postmine channel is designed to safely pass the peak flow from the 100-year, 24-hour <br />storm event. All hydrologic and hydraulic inputs and results are shown on the SEDCAD computer <br />printouts in Sections 9 and 1D. The locations of the ditches are shown on Maps 2.05-M4, Drainage <br />and Sediment Control Plan, and 2.05-MS Postnvning Topography. <br />The ]00-year, 24-hour peak flow for Elk Creek is 107.Ocfs (using a conservative CN of 60). The <br />methodology and assumptions used to deterttvne the peak flow are included in previously approved <br />• submittals (refer to Section 2). The existing, proposed, and postmine channel profiles for Elk Creek <br />aze shown on the Elk Creek Profiles (Map 2.05-M7). <br />A berm will be constmcted to separate Ditches D3 and D4 and to sepazate Ditches DS and D1. The <br />height of the berm will be at least 1 foot higher than the high Flow mark of the ditches. A summary of <br />channel inputs and results aze shown on the attached Figures. <br />Channel outlets have been designed for Ditches D4, D6, and D7. A conservative design Elow of 4 cfs <br />was used in the designs. Channel downdrains [o Elk Creek will be azmoted and the designs ate <br />shown in Sectlon 11. <br />Downdrains will be inrorporated into the slope stabilization area. The downdrains will be Field fitted <br />as the slope area is graded. Atypical downdrain configuration is shown in Figure 7.1 and typical <br />locations are shown on Map 2.05-M4. <br />• <br />