PERMFILE58183 - Laserfiche WebLink

Home Browse Search

• ROADABLE EQUIPMENT: __________________ Total Eqp Machine Description Lost/hr MOB/DEMOB SUPPORT EGUI PMENT: --------------------------- weight Ownership Non-Roadable Eqp. Description (tons) Cost/hr ___________________________________________________ ___________________________________________________ Total Eqp. Roadable Eqp. Description Cost/hr ~~ fleet Size Haul Trip Return Trip (no. hauled) Lost/hr Cost/hr Subtotals E0.00 50.00 Haul Rig Fleet Sixe Cost/hr (no. hauled) _____________________________ Subtotals Fleet Size (no. hauled) sheet 2 of 2 Haul Trip Return Trip DDT Permit Cast/hr Lost/hr Lost/ea E0.00 E0.00 E0.00 __--____ _________ _________ Haul Trip Return Trip Cost/hr Cost/hr Subtotals E0.00 E0.00 EQUIPMENT HAUL DISTANCE & TIME Nearest major city or town within project area region: Grand Junction Total one way travel distance = 5.0 miles. Average travel speed = 35.00 mph. Job Time - Non Roadable Equip.= 0.50 hours load Roadable Equip.= N/A hours load 0.14 hours haul 0.14 hours haul 0.50 hours unload N/A hours unload 0.14 hours return 0.14 hours return JOB COST Total Mob/Demob Cost = E1,40b.99 NOTE: Non-roadable equipment (haul rig required to transport) mob/demob costs based on 2 round trips, each trip consisting of a one-way loaded haul and a one-way empty return. Roadable equipment (no haul rig required) costs based on one round trip. Colorado DOT requires special permits for oversize equipment on certain specified road segments within the State. Separate permits are required for each rig on each loaded trip. Additionally, pilot cars (one or two per rig depending on degree of oversize) are also required for oversize equipment hauling, and loading/unloading times must be increased substantially for equi Anent which must be partially dismantled for transport and re-assenbled at the job site. Casts far lifting equi Anent and other support equi Anent needed for this work should be included in the mob/demob costs.