Laserfiche WebLink
U <br />U <br />I• <br />New Horizon 2 <br />Reclaimed Krill Drainage Channel Design <br />West Lateral <br />Introduction <br />The design of the reclaimed drainage channel in the New Horizon 2 permit area was based on DMG <br />regulations for conveyance of overland flow of watersheds less than one square mile. The reclaimed <br />channel is shown on Map 2.05.4-2 between points BB to BB'. The premine drainage channel slope <br />is 2.67 percent and the postmining drainage channel will be 2.67 percent. <br />Design <br />For the design of this reclaimed channel, the SEDCAD+ model was used to predict runoff from the <br />watershed (see Attachment A). A 10-year, 24-hour precipitation event was used in the design. The <br />peak flow was determined at the downstream end of the drainage channel. Following is a list of main <br />input factors. <br />In ut Channel BB-BB' <br />Precipitation 2.0 in <br />Drainage Area 13.19 ac <br />CN 81 <br />L 1500 ft <br />Y 40 ft <br />Out ut <br />Q 4.49 cfs <br />Based on this discharge, SEDCAD+ was used to design the reclaimed drainage channel bottom width <br />based on Manning's equation calculation. The shape of the channel was assumed to be trapezoidal <br />with 3h:1 v side slopes. The channel bottom width was increased to insure that the peak velocity was <br />below the limiting velocity of 5.0 fps. Below is a summary of the input factors and the results <br />determined by the computer program. <br />(Revised 2-21-96) ATTACHMENT 2.05.4(2)(C)- 2-1 <br />