|
SPECIMEN LABEL UPD.47ES AVAILABLE AT WtiVW.GREENBOOK.NET 2
<br />Emptied container retains vapor and product residue. Observe all labeled safe- or minimize foam, avoid the use of mechanical agitators, terminate by-pass and
<br />guards until container is cleaned, reconditioned, or destroyed. remm lines at the bottom of the tank and, if needed, use an approved anti-foam
<br />See container label for STORAGE AND DISPOSAL instructions. or defoaming agent
<br />S.0 GENERAL INFORMATION ~ 6.2 Tank Miring Procedure
<br />(How this product works) Mix labeied tank mixtures of this product with water az follows:
<br />Product Description: This product is a.postemergent, sysumic herbicide with 1 place a 20- to 35-mesh screen or wetting basket over filling port.
<br />no soil residua] activity. It is generally non-selective and gives broad-spectmm 2 Through [he screen, fill the spiny mnk one-half full with water and start
<br />control of many annual weeds, perennial weeds, woody brash and [rtes. It is agitation.
<br />formulated as awater-soluble liquid. It may be applied through most standard
<br />industrial or field-type spmyers afrer dilution and thorough mixing with waur or -
<br />3. If ammonium sulfate is used add it slowly throug4 the screen into the tank.
<br />other carriers according to label instructions. ~ - Continue agitation. Ensure that dry ammonium sulfau is completely dissolved
<br />Time. tin Symptoms: This product moves through [he plant from the point of in the spray tank before adding other products.
<br />4. If a wettable powder is used, make a slurry with the water carrier, and add it
<br />foliage contact to and into the root system. Visible effects on most annual weeds SLOV,ZY through the screen into the tank. Continue agitation.
<br />occur within 2 to 4 days, but on most perennial weeds may not occur for 7 days
<br />or more. Extremely cool or cloudy weather following treatment may slow activity 5. If a flcwable formulation is used, premix one par[ flowable with one part water.
<br />of this product and delay development of visual symptoms. Visible effecu area Add diluted mixmre SLOWLY through the screen into the tank. Conrinue
<br />gradual wilting and yellowing of the plant which advances to complete browning agration.
<br />of above-ground growth and deteriomdon of underground plant parts. 6. If an emulsifiable concentrnte fornulation is used, premix one part emulsifiable
<br />Stage of Weeds: Annual weeds are easiest to control when they are small. Best ~ concenhate with two parts water. Add diluud mixmre slowly through the scrern
<br />into the mnk. Continue agitation.
<br />control of most perennial weedais obtained when treawent ismade at late growth
<br />stages approaching maturity. Refer to the "ANNUAL WEEDS", "PERENNL4L 7. Continue filling the spiny mnk with water and add the required amount of this
<br />WEEDS" and "WOODY BRUSH AND TREES RATE TABLES" for recom- product near the end of the filling process.
<br />mendations for specific weeds. 8. If a nonionic surfacmnt is used, add it m the. spiny tank before completing the
<br />Always use the higher mu of [his product per acre within the recommended rtnge
<br />when weed growth is heavy or dense or weeds are growing in an undisturbed filling process.
<br />9. Add individual tornulations to the spray mnk as follows: wettable powder,
<br />(noncultivated) area. ftawable; emulsifiable concentrate, drift [eduction additive, waur-solubl<liquid
<br />Do no[ treat weeds underpoor growing conditions such as drought stress, disease
<br />or insect damage, as reduced weed control may result. Reduced results may also followed by surfacmnt.
<br />Mainmin good agitation at all times until the contents of the tank arc sprayed If
<br />occur when treating weeds heavily covemd with dust the spiny mixmre is allowed to Settle, thorough agitation is required to resuspend
<br />Cukural Considerations: Reduced control may result when applications art the mixmre before spraying is resumed.,
<br />made to annual or perennial weeds that have been mowed, grazed, or cuS and Keep by-pass line on or afar the bottom of the mnk to minimize foaming. Semen
<br />have not been allowed to regrow to the recommended singe for treatment. size in nozzle or lint strainers should be no Suer than 50 mesh
<br />Raimfasmess: Heavy minfaD soon afrer application may wash this product off of Always predeumrine the compatibility of labeled tank mixtures of this product
<br />the foliage and a repeat application may be required for adequate control. with water carrier by miring small proportional quantifies in advance. Ensure that
<br />Spray Coverage: For best rcsulm, spiny coverage should be uniform and tom- the specific mnk mixnue product is registered for application at the desved site.
<br />"
<br />plea. Do not spiny weed foliage to the point of runoff. Refer [o the "Tank Mixing" section of "GENERAL INFORMATION
<br />for
<br />Mode of Action: The active ingredient in this product inhibim an enzyme found additional precautions.
<br />only in plants and microorganisms that is essential to formation of specific amino 63 Miaiug for Hand-Aeld Sprayers
<br />acids. Prepare die desired volume of spiny solution by mixing the amount ofdiis product
<br />No SoB Activity: Weeds must be emerged at the time of application to be in water :rs shown in the following table:
<br />controlled by this product Weeds germinating from seed aRer application will not Smrav Solution
<br />be controlled. Unemerged plants arising from unattached underground rhizomes
<br />or root stocks of perennials will not be affected by the herbicide and will continue Desired Amount of Roundup Original
<br />[o grow. ~ Volume OS% 1% 1.5% 2% 5•/. 10%
<br />Biological Degradatiam: Degradation of this product is primarily a biological
<br />process carried out by soil mimobes. - ~ 1 gal 0.7 oz 13 oz 2 oz 2.7 oz 6.5 oz 13 oz
<br />~
<br />Tarok Mixing: This produd does not provide residual weed control. For subse- 5 qt 10 qt
<br />25 gal ] pt 1 qt 1.5 qt 2 qt
<br />100 gal 2 qt I. gal 1.5 gal 2 gal 5 gal 10 gal
<br />quent residual weed controi, fallow a Zabel-approved herbicide program. Read and
<br />carefully observe the cautionary smtements and a0 othm information appearing 2 tablespoons = I fluid ounce
<br />on the labels of all herbicides used. Use according m the most restrictive Iabe] For use "vi knapsack spmyers, it is suggested that the recommended amountof this
<br />directions for each product in the mixmre.
<br />Product be mixed with water in a larger conmintt. Fifl sprayer with the mixed
<br />Bu er and a4 users arc ms onsible for all loss or dama a in connection with
<br />Y P R solution.
<br />[he use or handling of mixmrcs of this product with herbicides or other materiahs~ 4 SnrfBctauts
<br />6
<br />that am no[ expressly recommended in this labeling. Mixing this product with .
<br />herbicides or other materials no[ recommended on this label may result in reduced Nonionic surFecmnts (NlS) orwetting agents that are labeled for use with herbicide
<br />performance. may be added to the spray solution. Do not reduce razes of this herbicide when
<br />When tlris label recommrnds a tank mixmre with a generic active ingredient such adding surfacmnts. Read and carefully observe cautionary smtements and other
<br />information appearing on the additves label.
<br />az diuroq atrazine, 2,4-D, or dicamba, the user is responsible for ensuring that
<br />the mixmre product's label allows the specific application. ~ When adding additional surfactant, use 0,5 percent surfacmn[ concentration (2
<br />Annual Maximum Use Rate: Except as otherwise specified in a crop section 9uarts per 100 gallons of spiny solution) when using surfacmnts that contain at
<br />least 70 percent active surfactant
<br />or a 1 percent surfacmnt concentration (4 quatrs
<br />of Nis label, the combined toml of all Veawents must no[ exceed 8 quarts of ,
<br />Prn 100 gallons of spiny solution) for those surfactants containing less than 7D
<br />this product per acre per year. For applications in non-crop sizes or in treq vine, Percent arrive surfacmnt
<br />or shmb crops, the combined total of a0 treatments must not exceed ]0.6 quarts
<br />of this product per acre per year. The maximum use razes smud throughout 6.5 Ammonium Sulfate
<br />this Product's labeling apply to this product combined with the use of all other The addition'of 1 to 2 percent dry ammonium sulfate by weight or 8.5 m 17
<br />herbicides -conmining g}yphmsau or sulfosate as the active ingredient, whether pounds per 100 gallons of water may increase the performance of this product,
<br />applied es mixtures or sepmauly. Calculate the application razes and ensure that particulazty under hard waur conditions, drought conditions or when tank mixed
<br />the total use of this and other gtyphosate or sulfosate containing products does with cer4.in residual herbicides, on annual and peremial weeds. The equivalent
<br />not exceed stated maximum use rate. rate of ammonium sulfau in a liquid fornulation may also be used. Ensure that
<br />NOTE: Use of this product in amy manner not consisunt with this label may dry ammonium sulfau is completely dissolved in the spiny mnk before adding
<br />resale in injury to persons, animals or crops, or other unintended consequences. herbicides or surfacmnts. Thoroughly rinse the spiny system with clean water
<br />6.0 MIXING ~ afar use to reduce corosion.
<br />Clean sprayer parts immediauly after using this product by thoroughly flushing NOTE: V/hen using ammonium sulfate, apply [his product at totes iceEmmeraded
<br />wiffi waur in this label. Lower rates will result in. reduced performance. The use of ammo-
<br />NOTE: REDUCED RESULTS MAY OCCUR IF WATER CONTAINING SOIL nium sulfate as an additive does not preclude the need for additional surfactant
<br />IS USED, SUCH AS VISffiLY MUDDY WATER OR WATER FROM PONDS 6.6 Colorants or Dyes
<br />AND DITCHES THAT IS NOT CLEAR Agriculmially approved colorants or marking dyes may be added to this product.
<br />6.7 Mixing with Water Colorants or dyes used in spiny solutions of this product may reduce performanc
<br />i
<br />ll
<br />l
<br />dil
<br />t
<br />d
<br />t
<br />i
<br />U
<br />l
<br />di
<br />h `
<br />
<br />This product mixes readily with water. Mix spiny solutions of this product as
<br />espec
<br />a
<br />y at
<br />ower rates or
<br />ons.
<br />se co
<br />oran
<br />s or
<br />yes accor
<br />o t
<br />ut
<br />ng
<br />manufacturer's recommendations
<br />es
<br />follows: Fill the mixing or spray mnk with the required amount of waur. Add the .
<br />recommended amount of [his product near the end of the filling process and mix 6.7 Drift Reduction Additives
<br />well. Use caution [o avoid siphoning back into the carrier souroe. Use approved Drill reduction additives may be used with all equipment types, except wiper
<br />anti-back-siphoning devices where requved by state or local mgulatrons. During applicators, sponge bars and Controlled Droplet Applicamr (CDR) equipment.
<br />mixing and application, foaming of the spray solution may occur. To prevent When a drift reduction additive is used, read end carefully observe the cautionary
<br />Database and format copyright ©bv VPC Acquisition Corporation..4 11 rights reserved.
<br />
|