HYDRO23427 - Laserfiche WebLink

Home Browse Search

Paperwork Reduction Act Notice Public reporting burden for this collection of information is estimated m vary from a range of 10 hours as m average per response for some minor facilities, to 110 hours as m average per response for some major facilities, with a weighted average for major and minor facilities of 18 hours per response, including time fot reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding the burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Chief, Informatioo Policy Branch; PM-223, U.S. Environmental Protection Agency, 401 M Street, SW Washington, DC 20460; and to the Office of Information and Regulatory Affairs, Office of Management and Budget, Washington, DC 20503. General Instructions 1. If form has been partially completed by preprinting, disregazd instructions directed at entry of that information already preprinted. 2. Enter 'Permittee Name/Mailing Address (and facility name location, if different)," "Permit Number," and "Discharge Number" where indicated. (A separate form is required for each discharge.) 3. Enter dates beginning and ending 'Monitoring Period" covered by form where indicated. 4. Enter each "Parameter" as specked in monitoring requirements of permit. 5. Enter "Sample Measurement" data for each parameter under "Quantity" and "Quality" in units spxified in permit. "Average" is normally arithmetic average (geometric average for bacterial parameters) of all sample measurements for each parameter obtained during "~l9onitoring Period'; "Maximum" and "Minimum" are normally extreme high and low measurements obtained during "Monitoring Period." (Nate to municipals with secondary treatment requirement: Enter 30-day average of sample measurements under "Average," and enter maximum 7-day average of sample measurements obtained during monitoring period under "Maximum. ") 6. Enter "Permit Requirement" for each parameter under "Quantity" and "Quality" as specified in permit. 7. Under "No Ex" enter number of sample measurments during monitoring period that exceed maximum (and/or minimum or 7~ay average as appropriate) pemit requirement for each parameter. It none, enter "0". 8. Enter "Frequency ojAnalysis" both as "Sample Measurment" (actual frequency of sampling and analysis used during monitoring period) and az "Permit Requirement" specified in permit. (e.g., Enter "Coot," for continuous monitoring, "1/7" for one day per week, "I/30" for one day per month, "1/90" for one day per quarter, etc.) 9. Enter "Sample Type" both as "Sample Measuremen!" (actual sample type used during monitoring period) and as "Permit Requirement," (e.g., Enter "Grab" for individual sample, "14HC' for 24-hour composite, "N/A" for continuous monitoring, etc.) 10. Where violations of permit requirements are mported, attach a brief explanation to describe cause and corrective actions taken, and reference each violation by date. 11. it"no discharge" occurs during monitoring period, enter "No Discharge" across form in place of data entry. 12. Enter "Name/title ojPrincipal Executive Officer" with "Signature ojPrincipn! Executive Officer ojAuthorized Agent," "Telephone Number," and "Date" a[ bottom of form. 13. Mail signed Report [o Office(s) by date(s) specified in permit. Retain copy for your records. 14. More detailed instructions for use of this Discharge Monitoring Report (DMR) forth may be obtained from Office(s) specified in permit. Le,~gal Notice This report is required by law (33 U.S.C. 1318; 40 C.F.R. 125.27). Failure to report or failure to report truthfully can result in civil penalties not to exceed 510,000 per day of violation; or in criminal penalties not to exceed 525,000 per day of violation, ar by imprisonment for not more than onr year, or by both. EPA Form 3320-1 (Rev. 08-95)