Laserfiche WebLink
• Table 6-11 <br />Chemical and Physical Properties of Oxidized Upper Dakota Coal Seam and <br />Encompassing Very Dark Gray Shale (Unit 2) for <br />Phase II Samples Collected at Nulca Mine, <br />November, 1986 <br />Parameter Phase II Hole Nuinber2 <br />Units 873E 874E 875E 876E Mean SD3 <br />pH 4.0 4.0 4.0 - - 4.0 O.U <br />EC4, mmhos/cm 3.9 9.3 5.9 - - 6.0 2.2 <br />SPS, 90 88.0 62.7 65.9 - - 72.2 13.8 <br />Ca, meq/1 15.1 -- -- - - 15.1 -- <br />Mg,meq/1 12.8 -- -- - - 12.8 -- <br />Na, meq/1 21.4 -- -- - - 21.4 -- <br />SAR6 6.2 -- -- - - 6.2 -- <br />Total S, % 0.36 0.41 0.55 - - 0.44 0.10 <br />Sulfate S, % 0.04 0.09 0.41 - - 0.18 0.20 <br />• Pyrite S, % 0.03 0.03 0.00 - - 0.02 0.02 <br />Organic S, % 0.29 0.29 0.14 - - 0.24 0.09 <br />NP7 -12.9 2.4 -0.9 - - 3.8 8.U5 <br />ABPB -22.9 -7.6 -5.3 - - -11.9 9.6 <br />Fe, ppin 355.4 154.0 205.0 - - 238.1 104.7 <br />Mn, ppm 0.3 10.6 0.5 - - 3.8 5.9 <br />Ni, ppm 1.2 -- -- - - 1.2 -- <br />Zn, ppm 4.8 -- -- - - 4.8 -- <br />Mo, ppm 0.2 -- -- - - 0.2 -- <br />lUnit 2 consists of the oxidized and weathered upper Dakota Coal seam and <br />2the adjacent very dark gray to black carbonaceous shale. <br />For drill hole location, see Exhibit 6-3A, Overburden Sample Locations. <br />45D-Standard Geviation. <br />SEC-Electrical Conductivity. <br />6SP-Saturation Percentage. <br />7SAR-Sodium Adsorption Ratio. <br />NP-Neutralization Potential; Units are tons of CaC03 required per acre <br />• furrow slice. <br />BABP-Acid Base Potential; Units are tons of CaCO required per acre furrow <br />slice; ABP was calculated from Pyrite and Organ~c 5. <br />6-46 Revised 11/01/86 <br />