Laserfiche WebLink
PART I <br />Page 3 <br />Petmit No. CO-0000221 <br />PART I <br />A. TERMS AND CONDI170NS <br />1. Effluent Limitations <br />Beginning no lazer than the effective date of this permit and lasting through July 31, 2002, the permittee is authorized to <br />discharge from outfalls 002, 003, 004, 005, 006, 008, 009, 010 and 011. <br />In accordance with the Water Quality Control Commission Regulazions for Effluent Limitations, Section 10.1.3, and Regulations <br />for the Staze Discharge Permit System, Section 6.9.2, 5 C.C.R. 1002-2, the permitted discharge shall not contain effluent <br />parameter concentrazions which exceed the following limitations specified below or exceed the specified flow limitation. <br />a. OutfaLLs 002 and 003 <br />E[1luent Parameter Discharee Limitations <br /> 30-Dan Ave Daily Max <br /> <br />Flow, MGD Report Report <br />Total Suspended Solids, mg/P 35 70 <br />Total Iron, mg/P 3.5 7.0 <br />Settleable Solids, mP/P Report Report <br />Oil and Greaze, mg/P Repon 10 <br />pH, s.u. (minimum-maximum) Report 6.5-9.0 <br />Whole Effluent Tozicit}•, Acute N/A LCSO> 100% <br /> ALTERNATE LDrII'['ATIONS <br />Any discharge or increase in the volume of a discharge caused by precipitation within anv 24-hour period less than or equal to <br />the 10-veaz. 24-hour nrecioitation event (or snowmelt of equivalent volume) may comply with the following limitations subject to <br />burden of proof requiremenu described in Part I.A.2. <br />Effluent Parameter Discharee Limitations <br /> 30-Dan Ave Daily Maz <br />Flow, MGD Report Repon <br />Total Suspended Solids, mg/P Report Repon <br />Total Iron, mg/P Report Report <br />Settleable Solids, mF/f Report 0.5 <br />Oil and Grease, mg/f Repon 10 <br />pH, s.u. (minimum-maximum) Report 6.5-9.0 <br />Whole Effluent Tonicity, Acute N/A LC,o> 100% <br />Any discharge or increase in volume of a discharge caused by precipitation within any 24-hour period Greater than the 10-year. <br />24-hour event (or series of storms or snowmelt of equivalent volume) ~ comply with the following limitations subject to <br />burden of proof requirements described in Pan I.A.2. <br />Effluent Parameter Discharee Limitations <br /> 30-Dan AvQ Daily Max <br />Flow, MGD Report Report <br />Total Suspended Solids, mg/P Report Report <br />Total Iron, mg/f Repon Report <br />Settleable Solids, mf/f Report Report <br />Oi] and Grease, mg/P Report 10 <br />pH, s.u. (minimum-maximum) Repon 6.5-9.0 <br />Whole Effluent Tonicity, Acute N/A LC,e> 100% <br />See Part I.C. for Definitions. <br />INDBP 1/9/93 <br />