Laserfiche WebLink
N. FACE EQUIPFSENT AND SECTIOd HAULAGE EQUIPrr,Et;T ASSOCIATED WITH EACH: <br />' 1. Continuous Miner - MARRIETTA 3080 <br />• 2. Shuttle Cars - Diesel Torkars 48-60 <br />3. Roof Drill - Lee Norse TDI-43 <br />4. Auxiliary Fan - 24" C.S.E. <br />t 5. Battery Scoop - S & S Corp 488 <br />6. <br />0. SEQUEI:CE OF MINING AND INSTALLATION OF SUPPORTS INCLUDIIJG TEMPORARY <br />SUPPORTS: <br />Dra~:~ings shall be attached showing the maximum width of entries, rooms, <br />inter-sections, crosscuts, and (if applicable) pillar splits; the sequ- <br />ence of support installation--including temporary supports; the spacing <br />of supports; and where applicable the sepuence of mining pillars, including <br />cut seouence in those pillars necessary to establish a unifrom pillar <br />• line that eliminates pillar points and pillars thzt oroiect ir~bv the <br />breakline. <br />SIGHT LINES SHALL BE ESTABLISHED TO ASSURE THAT MINING PROJECTIONS IN <br />ENTRIES, ROOMS, CROSSCUTS, AND PILLAR SPL1T5 ARE FOLLOWED. <br />Entry Width 20' Centers 70' - 100' <br />Crosscut Width 20' Centers 80' - 200' <br />Room Width Centers <br />Room Crosscut Width Centers <br />Slope Width (anthracite) <br />Gangway Width (anthracite) <br />• 5 <br />