HYDRO21626

• Permit No: C1980005
• IBM Index Class Name: Hydrology
• Doc Date: 10/24/2005
• Doc Name: 3rd Quarter 2005 Sedimentation Pond Inspection
• From: Seneca Coal Company
• To: DMG
• Permit Index Doc Type: Sediment Pond Inspections
• Media Type: D
• Archive: No

PERIODIC INSPECTION FORM
Water, Sediment, or Slurry Impoundments
INSPECTOR'S NAME: Dennis Jones DATE: ~ ~S - OS
NPDES I.D . NO.: N A

FACILITY
CONFIGURATION:
Incised
Pond G•aa`os
DATE LAST INSPECTION:
SITE NAME : Shill Control Pond No. 2 LOCATION: NW'/. NEB/, Sec. 34, T6N. R87W
MINE NAME : Seneca Mine II (Seneca Coal Co) LOCATION: 7.1 mi. SE of Havden, CO
MINE I.D. NO.: CDMG Permi t No. C- 80-005 OWNER'S REP.: Grego Kitchen, Gen Mar
Circle or write in appropriate response
1. Foundation preparation (removal of vegetation, stumps, topsoil: Yes
2. Lift thickness: N A
3. Compaction according to approved plan:
4. Burning (specify extent and location): N A
5. Angle of slope: upstream, downstream Total = N A
6. *Seepage (specify location, color, and approximate volume)
From underdrain pipes:
At isolated points on embankment slopes: Yes No N/A
At natural hillside: Yes No N/A
Over widespread areas: Yes No N/A
From downstream foundation area: Yes No N/A
"Boils" beneath stream or ponded water: Yes No N/A
7. Cracks or scarps on crest: Yes No N/A
8. Cracks or scarps on slope: Yes No N/A
9. Sloughing or bulging on slope: Yes No N/A
10. *Major erosion problems: Yes No N/A
11. Surface movements in valley bottom or on hillside: Yes No N/A
12. *Erosion of toe: Yes No N/A
13. *Water impounded against toe: Yes No N/A
14. Existing embankment freeboard: (normal = 7.0') ]~ feet
15. Increase ~ Decrease in water level: O•S feet
16. Cracks, bulging, or erosion on upstream face: Yes No N/A
17. Visible sumps or sinkholes in slurry surface:
18. *Clogging
Spillway channels and pipes: Yes No N/A
Decant system:
Diversion ditches: NSA
19. *Cracking or crushing of pipes
Spillway pipes:
Decant system: NL
20. Trash racks clear and in place:
*Major adverse changes in these items could cause instability and should be reported to the
Engineering Manager and Mine Superintendent for further evaluation. Adverse conditions noted in
these items should normally be described (extent, location, volume, etc.) in the space on the
back of this sheet.