Laserfiche WebLink
Paragon Analytic <br />INORGANICS CASE NARRATI <br />CEMEX, Inc. <br />A + C Pits <br />Order Number - 0507276 <br />1. This report consists of 2 water samples. <br />2. The samples were received cool and intact on 07/29/05. <br />3. The samples were prepazed for analysis based on Methods for theChemical <br />Analysis of Waters and Wastes (MCAWW), May 1994 procedures. <br />4. The samples were analyzed following MCAWW procedures for the following <br />methods: ~, <br />Analvte Method SOP # <br />pH 150.1 1126 Rev 14 <br />Specific conductance 120.1 1128 Rev 7 <br />5. All standards and solutions were used within their recommended shelf life. <br />6. The samples were prepazed and analyzed within the established hold time for each <br />analysis. <br />All in house quality control procedures were followed, as described below. <br />7. General quality control procedures. <br />^ All initial and continuing calibration verifications (ICV/CCV)'jassociated with <br />each analytical batch were within the acceptance criteria for th'e requested <br />analyses. This indicates a valid calibration and stable instrument conditions. <br />8. Matrix specific quality control procedures. I <br />Sample 0507276-3 was designated as the quality control sample for each analysis. <br />Similazity of matrix and therefore relevance of the QC results should not be <br />automatically inferred for any sample other than the native sample selected for <br />QC. <br />^ A sample duplicate was prepared and analyzed with each batch. F.ll guidance <br />criteria for precision were met. <br />9. Sample dilutions were not required for the requested analyses. <br />