Laserfiche WebLink
• aquifer, and other coal seams, if any, below the lowest coal seam to be <br />mined. The geology for the areas proposed to be affected by surface <br />operations and facilities, those surface lands underlain by the coal to <br />be mined, and the coal to be mined shall be separately described as <br />follows including a map and cross-sections prepared to the standards of <br />2.10 which shows: <br />(i) Nature, depth, and thickness of the coal seams to be <br />mined, any coal or rider seams above the seam(s) to 6e mined, each <br />stratum of the overburden, and the stratum immediately below the Lowest <br />coal seam to be mined; <br />(ii) A geologic map with geologic cross sections of the <br />proposed permit area, including coal crop Lines and the strike and dip of <br />• the coal to be mined; <br />(iii) The geology for those surface lands within the <br />permit area which are underlain by the coal seam to be extracted and the <br />geology of the coal seam itself including: <br />(A) The depth, classification and geologic structure <br />of the overlaying strata; <br />(B) The location of subsurface water, if <br />encountered; and <br />(C) Analysis of the coal seam including, but not <br />limited to, the pyrite, marcasite and sulphur content. <br />• (iv) The geology of the strata down to and including the <br /> stratum immediately below any coal seam to be mined shall be described <br />2.04-21 <br />