HYDRO20123

• Permit No: C1980005
• IBM Index Class Name: Hydrology
• Doc Date: 7/16/1997
• Doc Name: 2nd Qtr 1997 Inspections
• From: SENECA COAL CO
• To: DMG
• Permit Index Doc Type: SEDIMENT POND INSPECTIONS
• Media Type: D
• Archive: No

PERIODIC INSPECTION FORM
Water, Sediment, or Slurry Impoundments
INSPECTOR' S NAME : Michael Altavilla DATE: 06/27/97
NPDES I.D. NO.: N/A
FACILITY CONFIGURATION: Incised Pond DATE LAST INSPECTION: 03/20/97
SITE NAME: Truck Wash S ettling Pond LOCATION: NWy. NEy, Sec. 34. T6N. R87W
MINE NAME: Senec a II Mi ne (Seneca Coal Col LOCATION: 7.1 mi. SE of Hayden. CO
MINE I.D. NO.: C DMG Per mit No. C-SO-005 OWNER'S REP.: Brad Brown. Gen Mar
Circle or write in appropriate response
1. Foundation preparation (removal o£ vegetation, stumps, topsoil: es No N/A
2. Lift thickness: N/A inches
3. Compaction according to approved plan: Yes No
4. Burning (specify extent and location): Yes No
5. Angle of slope: upstream, downstream Total = N/A
6. *Seepage (specify location, color, and approximate volume)
From underdrain pipes: Yes No
At isolated points on embankment slopes: Yes No
At natural hillside: Yes No A
Over widespread areas: Yes A
From downstream foundation area: Yes ~
o N/A
"Boils" beneath stream or ponded water: Yes o N/A
7. Cracks or scarps on crest: Yes No
S. Cracks or scarps on slope: Yes No /
9. Sloughing or bulging on slope: Yes No /A
10. *Major erosion problems: Yes ~ N/A
11. Surface movements in valley bottom or on hillside: Yes No /
12. *Erosion of toe: Yes No
13. *Water impounded against toe: Yes No /A
14. Existing embankment freeboard: See comments 5.0 feet
15. Increase Decrease in water level: No chanve feet
16. Cracks, bulging, or erosion on upstream face: Yes ~ N/A
17. Visible sumps or sinkholes in slurry surface: Yes No N/A
18. *Clogginq
Spillway channels and pipes: Yes lNo1
Decant system: Yes o
Diversion ditches: Yes No
19. *Cracking or crushing of pipes
Spillway pipes: Yes No N[A
Decant system: Yes o ~/A
20. Trash racks clear and in place: es No N/A
*Major adverse changes in these items could cause instability and should be reported to the
Engineering Manager and Mine Superintendent Eor further evaluation. Adverse conditions noted
in these items should normally be described (extent, location, volume, etc.) in the space
on the back of this sheet.