Laserfiche WebLink
10 <br />• i <br />i <br />h <br />i <br />t <br />t <br />id <br />d i <br />Fi <br />4 <br />h <br />I <br />b <br /> ow <br />e var <br />ous s <br />ra <br />a <br />s prov <br />n <br />gure <br />. <br />t can <br />s <br />ng t <br />e <br />e observed <br />4 that the sand deposit is essentially of uniform thickness. On the average, <br />• the deposit is feet thick and dips gently eastward. <br />I The overburden is .composed mainly of sand, clay, shaly sand and <br /> crossbedded sandstone. The thickness of this deposit decreases in an <br /> easterly direction from 146 feet at the western boundary of the study <br />1 area and practically vanishes at Ennis Draw. In Ennis Draw the overburden <br /> material has been replaced by stream sediment as shown in Figure 4. - <br /> The maximum thickness of the coal seam is approximately 8 feet and <br /> occurs toward the center of the project area, but subsequently thins to <br /> about 2 feet at the north and east boundaries. The depth to the coal seam <br />I from the ground surface varies between 170 feet at the western boundary of <br /> the site to approximately 70 feet at Ennis Draw as Shown In Figure 4, <br />1 Although the overlying sand deposit is highly permeable it does not <br />•- contain water and, therefore, cannot be considered an aquifer. Both <br />~ the coal and the overburden are water bearing formations and are, there- <br />fore, the only aquifers considered in this study. <br />B. Characterization of Hydraulic Properties of Aquifers <br />Twenty-one wells have been constructed for the purposes of the <br />hydrologic study. The locations of these wells are shown in Figure 3. <br />The drilling and testing program was designed to treat the coal and the <br />overburden as individual potential aquifers. <br />A total of 10 wells were constructed to provide hydrologic data on <br />the coal seam. Wells numbered 61, 116, 132, 137, 162 and 171 are all <br />5-inch diameter wells completed in the coal. Figure 5 shows the typical <br />construction details for these wells. Four additional wells numbered <br />60, 62, 134 and l38 are 2-inch diameter wells constructed for the purpose <br />3 <br />r <br />