My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
PERMFILE44537
DRMS
>
Back File Migration
>
Permit File
>
500000
>
PERMFILE44537
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
8/24/2016 10:47:00 PM
Creation date
11/20/2007 11:56:56 AM
Metadata
Fields
Template:
DRMS Permit Index
Permit No
C1981038
IBM Index Class Name
Permit File
Doc Date
12/11/2001
Section_Exhibit Name
VOLUME 2 MINE PLANNING APPENDIX - VENTILATION PLAN
Media Type
D
Archive
No
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
93
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
C O L O R A D O k' E S T M O R E l A N D I N C <br />u <br />• <br />1. Vent pipe(s) will be installed, when needed, through the seal <br />and directed to the return air course. The pipe will not be more <br />than 8 inches in diameter, have a strength less than schedule 40 <br />steel pipe located near the roof but not closer than four fee[ <br />from a rib or on the centerline of the seal. The pipe will be <br />packed with gravel for at least Len feet or provided with a flame <br />arrester and the pipe ends closed with perforated caps. <br />Z. At least one seal (extreme up-dip seal) in each set of seals <br />shall have a surveillance tube 1/4" diameter copper with a valve, <br />Tube must be protected from crushing. <br />3. kfiere necessary, at least one 4" diameter water drainage pipe <br />will be installed (extreme down dip seal) in each set of seals. <br />The pipe will be located at the lowest elevation of the seal, end <br />the pipe will be corrosion resistant schedule 4D steel with capped <br />or valved end. <br />4. A pilaster shall be included in seal widths greater the 16 <br />feet and heights greater than 10 feet. <br />5. Blocks will be laid in a transverse pattern and these blocks <br />must be solid with minimt~ dimensions 8"x3"x16". Blocks must be <br />• mortared. The surface will be coated with mortar to provide a <br />good seal. <br />6. The perimeter of [he seal will be entrenched twelve inches in <br />[he floor roof and ribs. <br />-24- <br />Revised 05/27/81 <br />
The URL can be used to link to this page
Your browser does not support the video tag.