Laserfiche WebLink
Rpr 03 03 03:31p <br />p.2 <br />pad. A cap to regulate intake air flow was installed. A fence was installed around the drill pad to prevent <br />access by cattle, after completion of the hole. <br />Access was derived from an existing light-use road running up to an old electrical borehole. A series of <br />culverts were placed under the existing road and their locations shown on Figure 23, General Location of <br />Escape Shaft. The design for the culverts can be found in Exhibit 8D, Escape Shaft/I.ight-Duty Road <br />Culvert Design. TCC constructed an additiona125-foot wide road at a 4% grade to access the site. The <br />1,300-foot long road is graveled with 0.5' of 6-inch pit run gravel. <br />MR 02-179 2.05-45.4 08/06/02 <br />