My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
PERMFILE44162
DRMS
>
Back File Migration
>
Permit File
>
500000
>
PERMFILE44162
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
8/24/2016 10:46:37 PM
Creation date
11/20/2007 11:50:37 AM
Metadata
Fields
Template:
DRMS Permit Index
Permit No
M1999002
IBM Index Class Name
Permit File
Doc Date
4/20/1999
Doc Name
TR 1 TO APPLICATION RECLAMATION PLAN CHAPTER 8 & APPENDICES
From
DMG
To
AMERICAN SODA
Media Type
D
Archive
No
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
68
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
<br /> <br />moisture retention. The second time is following completion of soil reconswction and <br />immediately prior to commencement of revegetation operations. Care must be taken when <br />ripping, disking or plowing topdressing so that operations avoid turning over the soil and <br />bringing up excessive amounts of subsoil materials. <br />Contour Furrows <br />Contour furrows are placed perpendicular to the slope on the contour using a modified <br />Rome disc, duck's-foot plow or similar agricultural implement. Furrows are normally <br />spaced 3 to 4 feet apart and may range from 6 to 12 inches in depth depending upon soil <br />characteristics. Prior to contour furrow conswction, the slope contours should be staked <br />by a hand level or instrument survey to aid the operator in placement on the contour. Care <br />should be taken to avoid furrowing off contour. Interrupting the contour on a periodic <br />basis helps to minimize breaching and erosion problems associated with contour furrows <br />that are placed off level. <br />Land Imprinting <br />Land imprinting is accomplished using a roller with any number of various geometric <br />configurations. Normally the geometric pattern is repeated around the imprinter's drum, <br />with two or three shapes being repeated in a non-linear or alternating fashion. The shapes <br />used should promote their penetration and imprinting into the soil surface. Imprinting may <br />be used on any slope where equipment can be operated. Because of its non-linear pattern <br />imprinting is especially useful on steep slopes where equipment can't be operated on the <br />contour. Imprinting works best on medium-textured soils. Soils that are too sandy do not <br />imprint well because they fail to retain the imprinter's shapes; soils that are high in clay <br />content may present problems with adequate penetration. <br />Erosion Control Fabrics and Blankets <br />Erosion control fabrics may be used on slopes where erosion potentials are moderate to <br />high and where the application of mulch materials is either not physically possible or is not <br />expected to adequately protect the slope during the vegetation establishment period. <br />Erosion control fabrics may be installed perpendicular to or up and down the slope (Figure <br />C-I). Fabrics should be installed per the manufacturers' specifications. Properly installed <br />and maintained blankets are extremely effective in stabilizing soil and promoting vegetation <br />germination and establishment. Their relatively high cost requires that they be used <br />judiciously. <br />Wattling <br />Wattles are typically used for freshly disturbed slopes or as a reclamation measure for <br />seriously eroded and barren slopes. Historically, wattling involves the embedding of tree <br />or shrub branches into the soil surface (Figure C-2 and Figure C-3). The woody material <br />is tied into bundles and placed on the contour. Wattling is normally used on wetter sites, <br />such as ephemeral or intermittent draws, where the woody materials have an opportunity to <br />take root and grow. While this project location likely provides limited opportunities for <br />employing classic wattling, it may be valuable as a stabilization tool in some areas. The <br />method is expected to be successful because it uses mechanical and vegetative means to <br />promote stabilization. Therefore, it should have good applicability on steep slope areas that <br />are difficult to access with machinery. In those situations excelsior erosion control blankets <br />may be rolled width-wise to serve as wattling materials. The 40.foot-long to 80-foot-long <br />roll of blanket may be cut to desired length and installed similarly to wattles made of wood. <br />The roll will be partially buried in a shallow trench cut on the contour. It is expected that <br />C-2 <br />
The URL can be used to link to this page
Your browser does not support the video tag.