PERMFILE41809 - Laserfiche WebLink

Home Browse Search

''. I •°. lint rand idrnt.lfy h~:nui~cr and land nron uuy sCntc~rwiCs wlttch nra pret:rntly held ur have hero held in the paaC by applicant or any parson 01• lcl;nl entity ni:lillafed or associated wlf.h appllcauC: 10, Give n detailed description of the tncthod of operation [o be employed in i'hc Open minim: Overburden stripped from the pit will be placed on the floor of the pit in a level and uniform manner, It is presumed the contractor will use front end loaders to excavate the sand and gravel and feed it to his hauling and crushing equipment. e crushed material wi be stockpiled and fed to a bituminous mixing plant and __ hauled to the project. Upon completion of the project, the pit area will be left n a neat and clean manner, 11, Size in acres•of the area or areas to be ti:orked at any one time by applicant: 17.56 12. Set out a time table giving the periods of time which will be required for the various stages of the operation: - - Stripping and stockpiling overburden -~2.Days Excavating, crushing and hauling gravel - 3 Months Cleaning and smoothing pit area - 3 Days Placing overburden on floor of pit - 2 Days 13. Attach tc:o copies of an accurate map of the area affected by t}te opening . mining which map shall include, but not be limited to, the. following: a. The mop shall be made and certified to by a registered Land surveyor, professional engineer registered in the State of Colorado, or a qualified person. b. Identify the area on the map, with colored ink or some other manner, which corresponds with the application. c, Indicate adjacent deep mining and adjacent surface owners. - d. The map shall be to a scale of not less than one hundred (]00) feet to the inch and net to exceed sir, hundred sixty (660) feet to the in cit. e. Indicate the name and location of all creeks, roads, buildinns, oil and gas wells and lines, and poc;er and co:rstunication lines on the area of affected land and within tc;o hundred (200) feet of all boundaries of such area, f, Indicate the total area to be involved in the operation including the area to be mined and the area of land affected, g. Indicate the topography of the area with contour lines of sufficient detail to portray the direction and rate of slope of the land in question. h. Indicate the general type, thickness and distribution of soil over the area in question. i. 7ndi.cnte the t}•pe, character, and density of present vegetation covering the area in question. -2- LRE-1 - •\ r. _.~.-~.....~ 4 ' ..- ... .. _ ~ ~ 1 rw.