PERMFILE41113

• Permit No: C1996083A
• IBM Index Class Name: Permit File
• Doc Date: 4/20/2004
• Section_Exhibit Name: 2.05 Operation and Reclamation Plans
• Media Type: D
• Archive: Yes

2.05.3
8. Radial Stacker #1
This radial stacker conveys processed coal from the screen and crusher
building to the stoker coal pile. This 36-inch radial stacker is approximately
80-feet long. Its wheels are supported by a concrete runway.
9. Stoker Collecting Conveyor
The collecting conveyor transfers coal from the screen and crusher building
to the 36-inch radial stacker. This 36-inch wide conveyor is approximately
29-feet long.
10. Transfer Convevor
The transfer conveyor transports coal from the crushing and screening
building to the to the downhill conveyor transfer building. This partially
covered 920-foot long 48-inch wide belt is constructed on grade except for
the last 120-feet which is truss mounted to support its entrance to the
transfer building.
11. Downhill Convevor
• The downhill conveyor transports coal from the downhill conveyor transfer
building to the stacking tubes located at the highway stockpile area. This
2,755-foot long 48-inch wide bell is constructed on grade except for the last
475-feet which is truss mounted to support its elevation to the top of the coal
stacking tubes. The on grade section is partially covered. The truss
mounted section will be partially covered and will have a dribble pan.
12. Reclaim Loadout Convevor
The reclaim tunnel conveyor transports coal from the highway stockpile to
the transfer building. The 340-foot long section of this 60-inch wide belt is
mounted on grade in the reclaim tunnel. Where the belt exits the reclaim
tunnel, the conveyor is truss mounted and partially enclosed for another 340-
feet where it enters the transfer building.
13. Loadout Convevor
The loadout conveyor transports cog! form the transfer building to the batch
weigh loadout. This 1,000 foot long 60-inch wide belt is truss mounted and
totally enclosed.

TR-27 2.05 - 18 - 6/03
/~1fPRov~ g~/za/o3