Laserfiche WebLink
ROADABLE EQUIPMENT: <br />------------------ Total Eqp. Fleet Size Heul Trip Return Trip <br />Machine Description Cost/hr (no. hauled) Cost/hr Cost/hr <br />______ <br />_______________________________ <br />Drill Rig ___________________________ <br />(125.00 ____________________ <br />1 ____________ <br />(125.00 _______ <br />f125.00 <br />Pickup Truck (28.56 1 (28.56 (28.56 <br />Pater Truck f35.41 1 535.41 (35.41 <br />Flatbed Truck 534.14 1 f34.14 534.14 <br />_______________________________________________________________________________________________________ <br />Subtotals 5223.11 (223.11 <br />MOB/DEMOB SUPPORT EQUIPMENT: --------- ------- <br />sheet 2 of 2 <br />--------------------------- Weight Ownership Heul Rig Fleet Size Haul Trip Return Trip DOT Pe'mit <br />Non-Roadable Eqp. Description (tons) Cost/hr Cost/hr (no. hauled) Cost/hr Cost/hr Cost/ea <br />____________________________________________________________________________________________________________________ <br />Subtotals (0.00 f0.00 (0.00 <br />Total Eqp. Fleet Size Haul Trip Return Trip <br />Roadable Eqp. Description Cost/hr (no. hauled) Cost/hr Cost/hr <br />_______________________________________________________________________________________________________ <br />Subtotals 50.00 50.00 <br />EQUIPMENT XAUL DISTANCE 8 TINE <br />Nearest major city or town within project area region: Craig <br />Total one way travel distance = 7.0 miles. Average travel speed = 35.00 nph. <br />Job Time - Non Roadable Equip.= N hours load Roadable Equip.= N/A hours load <br />0.20 hours haul 0.20 hours haul <br />hours unload N/A hours unload <br />0.20 hours return 0.20 hours return <br />JOB COST Total Mob/Demob Cost = 5260.94 <br />_________ _____________ <br />_________ _____________ <br />NOTE: Non-roadable equi Anent (haul rig required to transport) mob/demob costs based on 2 round trips, each trip <br />consisting of a one-way loaded haul end a one-way enQty return. Roadable equipment (no haul rig required) <br />costs based on one round trip. Colorado DOT requires special permits for oversize equipment on certain <br />specified road segments within the State. Separate permits ere required for each rig on each loaded trip. <br />Additionally, pilot cars (one or two per rig depending on degree of oversize) are also required for oversize <br />equipment hauling, and loading/unloading times mist be increased substantially for equipment which must be <br />partially dismantled for transport end re-assembled et the job site. Costs for lifting equipment end other <br />support equipment needed for this work should be included in the mob/demob costs. <br />