Laserfiche WebLink
/ T = <br />M 1 N E P <br />C <br /> <br />~~ECEIVED <br />FEB 12 1999 <br />February 10, 1999 <br />iiiBl`wiln n1 Minerals & GeObgy <br />ITEC Environmental Colorado Inc. <br />707 1 T"Street <br />Suite 3720 <br />Denver, Colorado <br />80202 3404 <br />Te1.: 303 29B 1762 <br />Fax: 303 2740663 <br />e-matl: Imaxz®aolcom <br />h ttp:iiwww. rtecm i n.com <br />Ms. Christina Kamnikar <br />Division of Minerals and Geology <br />1313 Sherman Street, # 215 <br />Denver, CO 80203 <br /> <br />Re: Request for Removal of Containment Barriers in the Gold Hill <br />Mill, Permit # M-94117 <br />Dear Christina, <br />ITEC requests permission to remove the two containment barriers <br />that the MLRB had COM, Inc install in the Gold Hill Mill. We <br />currently have a conflict with MSHA regulations, which require that <br />the exit doors be free of obstruction. Because the barriers were <br />ordered to be installed by the MLRB, we believe we now need <br />your authorization to remove them. <br />The barriers were installed in front of two ebt doors in the mill, <br />because there were no floor sumps, and any spillage had the <br />potential to drain out the exit doors. That situation no longer <br />exists. ITEC has taken the following actions to deal with spillage <br />and containment. <br />Barrier #1 <br />Barrier #1 is located in front of the exit door, on the North wall of <br />the mill, in the crushing circuit room. It is near the water storage <br />tanks (which the previous operator used to store tailings). These <br />tanks have been cleaned out and now store only water. We have <br />