INSPEC11804 - Laserfiche WebLink

Home Browse Search

(Page 3) MINE ID # OR PROSPECTING ID ;<: ~~-r gst9_nR~ INSPECTION DATE; 319/fl,~ INSPECTOR~SINITIALS: KAP The following problems (PB) and/or possible violations (PV) (and suggested corrective actions) were identified during this inspection. The problems should be corrected by the dates given, or they will become possible violations. The possible violations should be corrected by the dates given to reduce theirseverity when considered by the Mined Land Reclamation Board. The inspector noted on the previous page should be notified of all corrective actions taken. PROBLEMS/POSSIBLE VIOLATIONS AND CORRECTIVE ACTIONS CORRECTION DATE 1 ~ 11/ 30/ OS During the inspection, it was discovered that no protective liner was installed under the above around fuel storage tank located on the permit area. This a problem related to Rule 3.1.6 and 3.1.7 of The Construction Materials Rules and Regulation for failure to minimize impacts to the prevailing hydrologic balance. PB or PV: _~8_ TOPIC(S): ~B_ rnrrertive Ar`tinn~ Install n nmtentivP liner r order tha stnmoP to nr~ Pvani cpiUPrt f~ ral from _ migrating into the 9rnund and forward nhntnc pf the nrntentive inctallntinns in nMG within 60 davs of receipt of this inspection reoorf. Alternatively submit a technical feyision to the ~Prmit to the I~M(~ within 60 riayc of rel'Pi nt of this inc~pction indic-atin~,f hat no fi iPls nr other toxic materials will he stnrPd in above ground ctorogQ tanks at the site 2• 10/30/05 During the inspection, it was discovered that There were no boundary markers identifying the permit boundary aT The site. This is a problem related to Section 3.1.12 (2) of the Construction Materials Rules and Regulations for failure to mark the boundaries of the affected area by monuments or other markers that are clearly visible and adequate to defineafe such boundaries. PB or PV: ~$_ TOPIC(S): ~ Corrective Action Place a~oropriate boundary morkers at the site within 30 davs of receipt ~ - - of this inspection report, and send photos to DMG for verification.