Laserfiche WebLink
2. List the amounts and types of materials on site which may be costly to remove (Examples: <br />soiled solvents, waste oils [metal laden], hydraulic fluids, antifreeze, etc.) and types of <br />containers (Examples: 55-gallon drums, 5-gallon bucket, 100-1b. sacks, etc.). Inquire as to <br />whether any of these materials are stored underground, and document accordingly. <br />Next '~ LOa~O wf -~ /1.07 ~~~nS . <br />3. List the number and volume of any PCB or PCB contaminated transformers. If no evidence of <br />"PCB Free" certification is found, and operator cannot produce documentation during inspection, <br />list all transformers and volumes. <br />l..e ~ f ~a-ns f o ~.-~+1 0 c/ S 4~ <br /><,P~~ ,. <br />F/ze S~'icke~ . <br />4. Give the location, area, and rough volume of all equipment storage/bone yard areas on site. <br />Rough volume is obtained by estimating the height of material stored and approximate area <br />covered by the material. <br />N~ - L o ado.- ,~. ,mot ~-~„~, . <br />5. List the location of any buried fuel tanks or fuel lines. 1f there are buried tanks, inquire about <br />the volume of them. <br />Nom. <br />~' . za <br />