Laserfiche WebLink
TABLE 6. <br />MATERIAL PROPERTIES <br />CLIENT: Newfields <br />PROJECT: CC&V Newmont Cripple Creek <br />Date Received:2/20/2025 QC'd By: <br />Date Reported:2/27/2025 TRI Job No.: <br />Client Sample ID:L#FND0147920139 L#24BB507 TRI Control No.: <br />Material Description:80mil LLDPE Double Sided Microspike <br />SPECIMENS Proj. <br />1 2 3 4 5 6 7 8 9 10 Avg.Std. Dev.Min Max Specs. <br />METHOD DESCRIPTION <br />ASTM D5994 Thickness (mils)EI#846 <br />Apparatus: Dead-weight dial micrometer with gauge points tapered at an angle of 60 o +/- 2 o to the horizontal with the tip <br />rounded to a radius of 0.8+/-0.1 mm(0.031+/-0.004 in), with a specified force of 0.56+/-0.05 N (2+/-0.2 oz) <br />Loading Time: 5 sec Specimen Size: 4" x 4"68 lowest <br />80 81 82 81 81 82 80 83 82 82 81 1 80 83 76 marv <br />ASTM D1505 Density (grams/ cm.3)EI#810 <br />0.9357 0.9357 0.9357 0.9357 0.0000 0.9357 0.9357 0.939 max. <br />ASTM D6693 Tensile Properties:EI#860 <br />Type IV Test Specimens: Type IV, Width of narrow section:0.25in, Length of narrow section:1.3in, Width Overall:0.75in, <br />Length Overall: 4.5in Rate of Separation: 2"/min <br /> Tensile Strength at Break (lbs/ in.- width) <br />MD 255 305 267 266 275 274 19 255 305 120 min. <br />TD 248 272 256 235 259 254 14 235 272 <br /> Elongation at Break (percent, %)Gauge Length = 2.0 in. <br />MD 553 595 559 538 556 560 21 538 595 250 min. <br />TD 596 640 597 567 616 603 27 567 640 <br />ASTM D4833 Puncture Resistance (lbs)EI#937 <br /> Specimens were tested as directed in Test Method D4833. They were clamped without tension between circular plates of <br /> a ring clamp attachment secured in the tensile machine. Test specimens were extended beyond the outer edges of the <br />clamping plates. <br />161 159 160 155 156 156 156 155 153 150 156 3 150 161 88 min. avg. <br />ASTM D5596 Carbon Black Dispersion (category rating per reference chart PCN: 12-455960-38)EI#817 9 in Cat 1 or 2 <br />1 1 1 1 1 1 1 1 1 1 1 in Cat. 3 <br />ASTM D4218 Carbon Content EI#1035 <br />Apparatus: Muffle Furnace <br />2.21 2.23 2.22 0.01 2.21 2.23 2 - 3 <br />(End of Table 6) (Sheet 1 of 1) <br />10 out of 10 in Category 1 <br />188351 <br />CA250174 <br />By accepting the data and results presented on this report, the Client agrees to limit the liability of TRI Environmental, Inc. from Client and all other parties for claims on issues, due to the use of this data, to the cost for the respective tests presented in this <br />report; and the Client agrees to indemnify and hold harmless TRI Environmental, Inc. from and against all liabilities in excess of the aforementioned limit. <br />LEGENDS: <br />MD - MACHINE DIRECTION <br />TD- TRANSVERSE DIRECTION 1970 S. Santa Cruz Street, Anaheim, CA 92805, www.precisionlabs.net <br /> TRI Environmental, Inc. dba Precision Geosynthetic Laboratories International