Laserfiche WebLink
<br /> <br />1970 S. Santa Cruz Street, Anaheim, CA 92805, www.precisionlabs.net, Tel No.: 714-520-9631 <br />TRI Environmental, Inc. dba Precision Geosynthetic Laboratories International, Inc <br /> <br /> <br />March 6, 2025 <br /> <br />Tyler Wendlandt <br />Newfields <br />401 Railroad St. Suite 206 <br />Elko, NV, 89801 <br /> <br />Re: FINAL LABORATORY TEST REPORT <br /> <br />Dear Tyler Wendlandt: <br /> <br />Thank you for consulting TRI California for your material testing needs. <br /> <br />Enclosed is the final laboratory report for the Conformance testing of one (1) 80mil Double Sided LLDPE Microspike. <br /> <br />PROJECT NAME: CC & V Newmont Mining Cripple Creek DATE REPORTED: March 6, 2025 <br />REFERENCE TRI JOB NO.: CA250199 <br />DATE RECEIVED: February 27, 2025 <br />SAMPLED BY: TRI-CA at AGRU, NV <br />TEST PERFORMED AT: TRI-CA Facility (see the complete contact info and address below), except otherwise noted. <br /> <br />SAMPLE IDENTIFICATIONS: <br />SAMPLE ID TRI CONTROL NUMBER <br />R#FND0147920234 L#24BB513 188451 <br /> <br />TESTS REQUIRED / PERFORMED: <br /> TEST METHOD DESCRIPTION <br />1. ASTM D5994 Thickness <br />2. ASTM D1505 Density <br />3. ASTM D6693 Tensile Strength <br />4. ASTM D4218 Carbon Black Content <br />5. ASTM D5596 Carbon Black Dispersion <br />6. ASTM D4833 Puncture Resistance <br /> <br />TEST RESULTS: The test results are summarized in the attached Table 1. <br /> <br />Note: The general conditioning and testing of the material samples identified in this report were performed within the range of the <br />laboratory environmental conditions; i.e., 20-24°C and 45-65% RH. Otherwise, the actual environmental conditions are indicated in the <br />respective test method reported. <br /> <br />Respectfully, <br /> <br />TRI Environmental, Inc. - California <br /> <br /> <br /> <br />Maria Espitia Chad Blackwell <br />Quality Assurance TRI-CA Director <br /> <br />attached laboratory test results are considered indicative only of the quality/property of samples/specimens that were actually tested. The designated test methods employed are <br />based on the generally It shall be noted that the sample(s) tested per this report is(are) believed to be true representative(s) of the material produced under the designation stated <br />herein. In addition, the accepted and current industry standards/practices. TRI neither accepts responsibility for nor makes claims to the intended final use and purpose of the <br />material. The test data and all associated project information shall be held confidential and not to be reproduced and/or disclosed to other parties except in full and with prior written <br />approval from pertinent entities duly authorized by the respective client, or the client itself. It is our policy to keep physical records of each job for two (2) years commencing from <br />the date of receipt of the samples and its corresponding electronic file for seven (7) years. Retained conformance samples are disposed of after one (1) month. On the other <br />hand, should you need us to keep them for a longer period, please advise us in writing. <br /> <br /> <br />2 Pages Total (including this sheet) <br /> <br />Signatures are on file <br />