Laserfiche WebLink
TABLE 2. <br />MATERIAL PROPERTIES <br />CLIENT:Newfields <br />PROJECT:CC&V Newmont Cripple Creek <br />Date Received:11/11/2024 QC'd By: <br />Date Reported:11/18/2024 TRI Job No.: <br />Client Sample ID:Sample 2 TRI Control No.: <br />Material Description:40mil HDPE Single Sided Microspike <br />SPECIMENS Proj. <br />1 2 3 4 5 6 7 8 9 10 Avg.Std. Dev.Min Max Specs. <br />METHOD DESCRIPTION <br />ASTM D5994 Thickness (mils) <br />Apparatus: Dead-weight dial micrometer with gauge points tapered at an angle of 60 o +/- 2 o to the horizontal with the tip <br />rounded to a radius of 0.8+/-0.1 mm(0.031+/-0.004 in), with a specified force of 0.56+/-0.05 N (2+/-0.2 oz) <br />Loading Time: 5 sec Specimen Size: 4" x 4" <br />41 40 42 41 41 41 40 42 42 41 41 1 40 42 <br />ASTM D1505 Density (grams/ cm.3) <br />0.9451 0.9451 0.9451 0.9451 0.0000 0.9451 0.9451 <br />ASTM D6693 Tensile Properties: <br />Type IV Test Specimens: Type IV, Width of narrow section:0.25in, Length of narrow section:1.3in, Width Overall:0.75in, <br />Length Overall: 4.5in Rate of Separation: 2"/min <br />Tensile Strength at Yield (lbs/ in.-width) <br />MD 114 115 112 111 108 112 3 108 115 <br />TD 121 119 117 120 115 118 2 115 121 <br />Tensile Strength at Break (lbs/ in.- width) <br />MD 163 173 163 166 132 160 16 132 173 <br />TD 152 132 151 144 109 138 18 109 152 <br />Elongation at Yield (percent, %) <br />MD 19 20 18 20 19 19 1 18 20 <br />TD 17 15 15 16 15 16 1 15 17 <br />Elongation at Break (percent, %)Gauge Length = 2.0 in. <br />MD 545 529 553 510 454 518 40 454 553 <br />TD 605 542 618 585 471 564 60 471 618 <br />ASTM D4833 Puncture Resistance (lbs) <br />Specimens were tested as directed in Test Method D4833. They were clamped without tension between circular plates of <br />a ring clamp attachment secured in the tensile machine. Test specimens were extended beyond the outer edges of the <br />clamping plates. <br />121 109 116 110 113 116 110 103 104 109 111 6 103 121 <br />ASTM D5596 Carbon Black Dispersion (category rating per reference chart PCN: 12-455960-38) <br />1 1 1 1 1 1 1 1 1 1 <br />ASTM D4218 Carbon Content <br />Apparatus: Muffle Furnace <br />2.60 2.54 2.57 0.04 2.54 2.60 <br />(End of Table 2) (Sheet 1 of 1) <br />10 out of 10 in Category 1 <br />185780 <br />CA241392 <br />By acceptingthe data and results presented on this report, the Client agreesto limit the liability of TRI Environmental, Inc. from Client and all other partiesfor claimson issues, due to the use of this data, to the cost for the respective testspresented in this <br />report; and the Client agreesto indemnify and hold harmless TRI Environmental, Inc. from and against all liabilities in excessof the aforementioned limit. <br />LEGENDS: <br />MD - MACHINE DIRECTION <br />TD- TRANSVERSE DIRECTION 1970 S. Santa Cruz Street, Anaheim, CA 92805, www.precisionlabs.net <br />TRI Environmental, Inc. dba Precision Geosynthetic Laboratories International