Laserfiche WebLink
<br /> <br />NOTICES <br />Technical Information - By using any Technical Information contained herein, Recipient agrees that said Technical Information is given by CPChem for convenience only, without any warranty or guarantee of any kind, and is <br />accepted and used at your sole risk. Recipients are encouraged to verify independently any such information to their reasonable satisfaction. As used in this paragraph, "Technical Information" includes any technical advice, <br />recommendations, testing, or analysis, including, without limitation, information as it may relate to the selection of a product for a specific use and application. <br /> <br />Page 3 <br />Filename: Agru Oven and QUV Exposure for HP-OIT Testing_2021_111221.docx <br /> <br /> <br /> <br />UV Aging Results: <br />Sample Initial <br />HP-OIT <br />(min) <br />HP-OIT after <br />1600 hrs of <br />UV exposure. <br />(min) <br />% HP-OIT <br />Retained after <br />1600 hrs of UV <br />exposure. <br />GRI-GM13 and GRI-GM17 <br />minimum % HP-OIT <br />requirements after 1600 <br />hours of UV exposure. <br />K307 Lot # PND821550, <br />Agru Roll # GTC0078250016, <br />black sheet, smooth, <br />nominal 0.057” thick <br />1313 1053 80.2% GRI-GM13: <br />% HP-OIT: 50% minimum <br />7104 Lot # DNE810980, <br />Agru Roll # GTA0077190117, <br />black sheet, textured, <br />nominal 0.055” thick <br />973 768 78.9% GRI-GM17: <br />% HP-OIT: 35% minimum <br />Notes: <br /> <br />• 1600 hours of UV exposure in accordance with ASTM D7238 implies a total UV chamber residence time of 1920 hours, e.g., 1600 hours of <br />irradiance and 320 hours of darkness with condensation. <br /> <br />• Sheet samples were aged with the shiny side of the sheet facing the UV bulbs. <br />