Laserfiche WebLink
non-negative integer. <br /> 7. Comment <br /> a. When a meter rolls over (such as from 999 to 000), is replaced or reset <br /> 4, add a comment stating the old meter serial number, the maximum <br /> number before the rollover or replacement and then enter the <br /> number on the face of the meter at the end of the reporting period. <br /> Update the meter information section with the new meter's serial <br /> number. <br /> 8. Meter information: <br /> a. Make <br /> b. Model <br /> c. The units represented by the digits on the meter (such as gallons or <br /> acre-feet) <br /> d. Multiplier for meter reading (if applicable) <br /> i. Residential well meters typically have a multiplier of 1.0 with <br /> units of gallons. Readings should generally report all numbers on <br /> the face of the meter (including non-rotating digits) with a <br /> multiplier of 1.0. <br /> ii. Larger agricultural or commercial wells typically read in acre-feet <br /> and typically have a decimal multiplier. For instance, with a <br /> multiplier of 0.001, a meter reading of 123456 represents 123.456 <br /> acre-feet. <br /> e. Correction factor <br /> i. This is a multiplier used when a meter test shows a need to <br /> correct the installed meter to an accurate reading. This will be <br /> 1.0 when there is not a test showing a need for correction. <br /> 9. Acre-feet pumped <br /> Use a formula to convert from the meter reading to acre-feet using the <br /> multiplier and correction factor. To convert meter readings in gallons to <br /> acre-feet, divide by 325,851. <br /> iii. Well diversion data using Electricity Consumption <br /> For wells approved to use power records and a Power Conversion Coefficient <br /> (PCC) to estimate water pumped, the accounting information is similar to well <br /> diversion data using flow meters (section 4.c.ii) above with the following <br /> replacements: <br /> 6. Power meter reading [this is the "Input" that will change regularly] <br /> 8. Power Meter Information <br /> a. PCC <br /> iv. Surface diversion data <br /> Include a column or row for each surface diversion with the following <br /> information: <br /> 4 Resetting a meter may be prohibited by local well measurement rules. <br />