2022-08-06_GENERAL DOCUMENTS - M1996013

• Permit No: M1996013
• IBM Index Class Name: General Documents
• Doc Date: 8/6/2022
• Doc Name: IMP Closeout Files
• From: DRMS
• To: DRMS
• Media Type: D
• Archive: No

Provide an equipment spotter equipped with a radio. X
I. EQUIPMENT OPERATION
Seatbelts shall be used at all times. X
Equipment always has the right-of-way. X
Safe parking procedures (chock blocks, etc.) shall be used at all times. X
All lights, horns, brakes, wipers, back-up alarms and other safety X
equipment shall be fully operational at all times.
Each piece of equipment shall have at least one portable fire X
extinguisher.
All mobile equipment, with the exception of pickup trucks with X
unrestricted rear view, will be equipped with back-up alarms.
Mobile equipment shall be equipped with roll-over-protection (ROPS)
and/or falling object protection structures (FOPS) as required by MSHA X
regulations.
All machinery shall be secured to ensure zero mechanical potential X
prior to work being performed on the machinery.
Equipment shall be maintained in safe condition. X
Provide a driller's safety platform. N/A
Inspect hydraulic and pneumatic lines and couplings daily. X
Provide whip checks for all airline connections. N/A
J. ELECTRICAL SAFETY
Electrical lock and tag procedures are to be used at all times. N/A
Prepare a plan for working in the vicinity of overhead electrical N/A
transmission lines.
K. SAFE WORK IN ELEVATED AREAS
Fall Protection shall be a full body harness and shock-absorbing lanyard. N/A
Wire rope lanyards are required for cutting and welding operations. N/A
All personnel are to be tied off if working where a fall hazard exists. N/A
Ladder work procedures shall include set up, tie off, inspection and
protection from overhead electrical hazards. Only non-conductive N/A
ladders are to be used.
L. SCAFFOLDS
Scaffold use requires an approved plan. N/A
Colorado Division of Reclamation, Mining and Safety SPECIFIC CONDITIONS
SHEAP
As of 6/20/2012 Page 3