Laserfiche WebLink
IJUUUOIIyUI CIIVCIUFIe IL).U!Of L 1-0/A-041-U-.-too I-MOOJW I IVOJDOOCVU <br /> PO#:461002243 <br /> Routing#.24-I-1A4-ZG-00107 <br /> INSURANCE REQUIREMENTS <br /> Please be sure to follow the instructions below that are identified in the Contract for ensuring acceptable insurance <br /> certificate documents are attached to the Contract when signing and returning it through the electronic signing process. <br /> A. Contractor shall obtain and maintain,and ensure that each Subcontractor shall obtain and maintain,insurance as <br /> specified in this section and the Standard Specifications 107.15 at all times during the term of this Contract. All <br /> insurance policies required by this Contract shall be issued by insurance companies with an AM Best rating of <br /> A-VIII or better. <br /> The Contractor shall obtain,and maintain at all times during the term of this Contract,insurance in the following <br /> kinds and amounts: <br /> 1. Workers'Compensation Insurance as required by state statute,and Employer's Liability Insurance covering <br /> all of Contractor's employees acting within the course and scope of their employment. <br /> 2. Commercial General Liability Insurance written on ISO occurrence form CG 00 01 10/93 or equivalent, <br /> covering premises operations, fire damage, independent Contractors, products and completed operations, <br /> blanket contractual liability,personal injury,and advertising liability with minimum limits as follows: <br /> (1) $1,000,000 each occurrence; <br /> (2) $2,000,000 general aggregate; <br /> (3) $2,000,000 products and completed operations aggregate; and <br /> (4) $50,000 any one fire. <br /> (5) Completed Operations coverage shall be provided for a minimum period of one year following final <br /> acceptance of work. <br /> If any aggregate limit is reduced below $1,000,000 because of claims made or paid, the Contractor shall <br /> immediately obtain additional insurance to restore the full aggregate limit and furnish to CDOT a certificate <br /> or other document satisfactory to CDOT showing compliance with this provision. <br /> 3. Automobile Liability Insurance covering any auto (including owned, hired, and non-owned autos) with a <br /> minimum limit as follows: $1,000,000 each accident combined single limit. <br /> 4. Professional liability insurance with minimum limits of liability of not less than$1,000,000 Each Claim and <br /> $1,000,000 Annual Aggregate for both the Contractor or any subcontractors when: <br /> (1) Contract items 625,629,or both are included in the Contract. <br /> (2) Plans, specifications, and submittals are required to be signed and sealed by the Contractor's <br /> Professional Engineer,including but not limited to: <br /> (i) Shop drawings and working drawings as described in subsection 105.02 of the Standard and <br /> Specifications. <br /> (ii) Mix Designs. <br /> (iii) Contractor performed design work as required by the plans and specifications. <br /> (iv) Change Orders. <br /> (v) Approved Value Engineering Change Proposals. <br /> (3) The Contractor and any included subcontractor shall renew and maintain Professional Liability <br /> Insurance as outlined above for a minimum of one year following final acceptance of work. <br /> 5. Umbrella or Excess Liability Insurance with minimum limits of $1,000,000. This policy shall become <br /> primary(drop down) in the event the primary Liability Policy limits are impaired or exhausted.The Policy <br /> shall be written on an Occurrence form and shall be following form of the primary. The following form <br /> Excess Liability shall include CDOT as an additional insured. <br /> Page 2 of 3 <br />