Laserfiche WebLink
December 27, 2023 Page 9-1 <br />Agapito Associates, Inc. <br />9 REFERENCES <br />Agapito Associates, Inc. (2011), “E Seam Gateroad Pillar and Barrier Geomechanical Evaluation: <br />Update Based on E1 Headgate XC 46-47 Instrumentation,” report to Mountain Coal <br />Company, February 2. <br />CGS (1998), “Calibration of ALPS to Australian Mining Conditions,” End of Grant Report, <br />ACARP Project C6036. <br />Das, M.N. (1986). Influence of Width to Height Ratio on Post-failure Behaviour of Coal. <br />International Journal of Mining and Geological Engineering, 4:79-87. <br />Kauffman, P.A., Hawkins, S.A., and Thompson, R.R. (1981). Room and Pillar Retreat Mining. A <br />Manuel for the Coal Industry. United States Department of the Interior. Bureau of Mines <br />Information Circulation, 8849. <br />Mark, C., F. Chase, and A. Campoli (1995), “Analysis of Retreat Mining Pillar Stability,” 14th <br />Conference on Ground Control in Mining. <br />Mark, C., Chase, F.E., and Zipf, R.K. (1997). Preventing Massive Pillar Collapses in Coal Mines. <br />DHHS (NIOSH) Publication No. 97-122. Pittsburgh, PA: U.S. Department of Health and <br />Human Services, Public Health Service, Centers for Disease Control and Prevention, <br />National Institute for Occupational Safety and Health. <br />Mark, C. (2010), “Pillar Design for Deep Cover Retreat Mining,” ARMPS Version 6, 3rd <br />International Workshop on Coal Pillar Mechanics and Design, Morgantown, WV, 26 July. <br />Molinda, G. and Mark, C. (1994). The Coal Mine Roof Rating (CMRR)  A Practical Rock Mass <br />Classification for Coal Mines. USBM IC 9387, 83 pp. <br />Peng, S. and Chiang, H. (1984). Longwall Mining. John Wiley & Sons, New York.