Laserfiche WebLink
Measurement and Payment <br /> Measurement will be made at the unit price established in Item 8.0 of the Bid Schedule. <br /> Measurement for payment will be made per acre revegetated estimated at 2 acres. Payment will <br /> be approved by the Project Manager upon completion of this item. Such payment will be <br /> considered full compensation for all labor, materials, equipment, and all other items necessary <br /> and incidental to the completion of this bid item. <br /> ITEM 9.0 INSTALL ROLLED DIP <br /> The Contractor will place one rolled dip on the existing road at the location marked by green <br /> dot on the Project Map and as directed by the Project Manager. <br /> The rolled dip will be drivable and have a minimum depth of twelve inches, and a minimum width <br /> of ten feet. The center of the dip will be angled thirty degrees from perpendicular to road length <br /> and drain from the upslope road shoulder to the downslope shoulder of the road. <br /> Measurement and Payment <br /> Measurement will be made at the unit price established in Item 9.0 of the Bid Schedule. <br /> Measurement for payment will be made per rolled dip installed. Payment will be approved by the <br /> Project Manager upon completion of this item. Such payment will be considered full <br /> compensation for all labor, materials, equipment, and all other items necessary and incidental <br /> to the completion of this bid item. <br /> ITEM 10.0 INSTALL ROLLED DIPS ***NOT GUARANTEED*** <br /> The Contractor will place rolled dips at 150 foot intervals for road grades where grade <br /> exceeds ten percent (10%) and on 200 foot intervals where grade is more than five percent <br /> (5%), but less than ten percent (10%), or as directed by the Project Manager. Rolled dip <br /> locations marked as yellow dots on Project Map. <br /> Rolled dips will be drivable and have a minimum depth of twelve inches, and a minimum width <br /> of ten feet. The center of the dip will be angled thirty degrees from perpendicular to road length <br /> and drain from the upslope road shoulder to the downslope shoulder of the road. <br /> Measurement and Payment <br /> Measurement will be made at the unit price established in Item 10.0 of the Bid Schedule and are <br /> not guaranteed. Measurement for payment will be made per rolled dip installed not to exceed <br /> sixteen rolled dips. Completion and payment will be as directed and approved by the Project <br /> Manager upon completion of this item. Such payment will be considered full compensation for <br /> all labor, materials, equipment, and all other items necessary and incidental to the completion of <br /> this bid item. <br /> Page 15 of 16 <br /> 7/23/23 <br />