Laserfiche WebLink
Red Creek Quarry Baseline <br />Surface Water and Groundwater Sampling and Analysis Plan Section 3: Surface Water Monitoring <br /> <br /> <br />3-3 <br /> <br />Stream Flow Measurements. Stream flow rates will be measured at the established location (Figure <br />1) using a flume installed in Red Creek. The SOP for flow measurement is described in SOP-8 <br />(Appendix B). <br />3.3.2 Laboratory Analysis <br />Surface water samples will be analyzed for the same broad range of constituents to establish <br />baseline conditions and perform direct comparisons to groundwater data. The analyte list includes <br />regulated surface and groundwater constituents and cation/anion data to compare water sources. <br />The constituents to be analyzed during surface water sampling events under this plan are provided <br />in Appendix A. Appendix A also provides the analytical methods, analytical limits, and water quality <br />standards for reference. Additional details, including holding times, container types, and <br />preservatives, are provided in the QAPP (Appendix B) and SOPs 4 and 7 (Appendix C). <br /> <br />