Laserfiche WebLink
S. Describe proposed surface excavation or other land disturbance, including roads, pits, <br /> trenches,waste piles,drill pads and collar areas of underground workings,ponds, etc. <br /> Eight reverse circulation or similar drill holes,with one to a depth of about 470 feet and the other seven to <br /> depths-6Y about325 feet, each using a 50R.50 footn pa Mot deep). I he eight n sites will require <br /> sevenroad segments that range from 45ft to 425 feet and totals 1055 feet built along gently sloping <br /> groun . <br /> Amount of material to be moved: 8 drill pads x 50ft x 50ft x 1ft deep=740 cubic yams of material moved. <br /> The new roads would be 1055 ft long x 10 ft wide x 1 ft deep=390 cubic yards of material moved. If <br /> overland travel on the natural surface is safe and possible, this is the preferred alternative to road building. <br /> The grand total of material moved is 1,130 cubic yards. <br /> 6. Proposed Disturbance (approximate) Describe the proposed drilling to be conducted, <br /> including anticipated number of holes,diameter,depth,location, etc. Submit additional <br /> pages if necessary: <br /> A. Drill Pads: <br /> Average Average <br /> Quantity 8 Width (ft) 50 Length (ft) 50 <br /> B. Drill Holes: <br /> Diameter <br /> Quantity 8 Depth (ft) 360 (in) approx 5.5 <br /> C. Mud Pits <br /> Average Average Average <br /> Quantity 8 Width (ft) n/a Length (ft) n/a Depth (ft) n/a <br /> D. Described proposed underground work, including reopening of old workings, <br /> advancement of adits or shafts, trenches, pits, cuts, rock dumps, or other types of <br /> disturbance,describe type,quantity and general dimensions: <br /> None <br /> Form 2-Public File Page 6 of 14 <br />