|
DocuSign Envelope ID:A3839651-094E-48D2-872A-CD6D1A8820BC
<br /> CDOT UTILITY/RELOCATION/SPECIAL USE PERMIT STANDARD PROVISIONS
<br /> Contractor and/or Consultant shall be required to provide an
<br /> endorsement naming CDOT as an Additional Insured on their d. The Permittee shall not start the permitted work before the
<br /> Commercial General Liability,Auto Liability,Pollution Legal Department accepts the TCP.
<br /> Liability and Umbrella or Excess Liability policies.
<br /> e. The Department may review and order changes to the TCP and
<br /> 4. WORK WHERE DEPARTMENT LACKS AUTHORITY MHT's during performance of the work,as required.
<br /> Utility work within municipal boundaries(pursuant to 43-2-135 CRS),on f. The Permittee shall comply with the TCP at all times during
<br /> certain public lands,or on private property,may require separate approval of performance of the work.
<br /> the appropriate jurisdictional agency or property owner.
<br /> g. The Permittee shall keep a copy of the TCP at the work site at all
<br /> 5. INSTALLATIONS ON FREEWAYS times during performance of the work for inspection.
<br /> CDOT may permit utility accommodations on freeways,including but not h. The TCP shall ensure that closure of intersecting streets,road
<br /> limited to the Interstate System,only in accordance with Utility approaches and other access points is minimized. On heavily
<br /> Accommodation Code provisions.Special case exceptions as defined therein traveled highways,the Department will not permit operations that
<br /> may be permitted only in accordance with FHWA-approved Departmental interfere with traffic during periods of peak traffic flow.
<br /> policy.
<br /> i. When Pennittee operations coincide with highway construction or
<br /> 6. JOINT USE ALTERNATIVES maintenance operations,the Permittee shall develop and implement
<br /> the TCP in cooperation and coordination with the highway agency
<br /> As directed or approved by CDOT,if necessary for the safe and efficient use of and/or its contractors and as otherwise directed by the Department
<br /> the ROW,Permittee shall utilize joint use facilities such as the placement of in the permit.
<br /> two or more separate Imes in a common trench,or attachment to the same
<br /> overhead support.The Permittee will be responsible for proper coordination j. All flaggers shall have a current CDOT flagger certification card
<br /> with other affected utilities. and shall be capable of communicating with the traveling public and
<br /> others at the work site.
<br /> 7. ATTACHMENT TO HIGHWAY STRUCTURES
<br /> 10. NCHRP 350 CRASHWORTHINESS REQUIREMENTS FOR
<br /> Pennittee is responsible for designing structure attachments,subject to the WORK ZONE TRAFFIC CONTROL DEVICES
<br /> approval of the CDOT Staff Bridge Design Engineer.
<br /> Work zone devices designated by FHWA as:Category I,including but not
<br /> 8. DRAINAGEWAYS AND WATERCOURSES limited to single-piece drums,tubes,cones and delineators;Category II,
<br /> including but not limited to barricades,vertical panels with light,drums or
<br /> The flow of water shall not ever be impaired or interrupted.Where possible, cones with light,portable sign supports,intrusion detectors and type III
<br /> crossings of ditches,canals or water-carrying structures shall be bored or barricades;or as Category III,including but not limited to concrete barriers,
<br /> jacked beneath.Irrigation ditch or canal crossings require approval of the ditch fixed sign supports,crash cushions,and other work zone devices not meeting
<br /> company or owner.Penmttee shall repair damage to any drainage facility to the the definitions of Category I or 11;shall meet NCHRP 350 crash test
<br /> satisfaction of the owner. requirements. The Permittee,or their contractor shall obtain and make
<br /> available upon request,the manufacturer's written NCHRP 350 certification,or
<br /> 9. TRAFFIC CONTROL PLAN as applicable,the FHWA Acceptance Letter,for each type of device. FHWA
<br /> Acceptance Letters for Category iI or Category iII Work Zone Devices may be
<br /> a. Prior to commencing work,the Permittee shall develop and submit accessed through the FHWA website at
<br /> to the Department for acceptance,a Traffic Control Plan(TCP)for htto://safety..fliwa.dot.gov/roadway dent/road hardware/wzd.htm
<br /> any accommodation work that will affect traffic movement or
<br /> safety. The Permittee shall implement the TCP and utilize traffic 11. WORKER SAFETY AND HEALTH
<br /> control devices as necessary to ensure the safe and expeditious
<br /> movement of traffic around and through the work site. a. All workers within the State Highway right of way shall comply with
<br /> their employer's safety and health policies/procedures and all
<br /> b. The Permittee shall develop the TCP,and Methods of Handling applicable U.S.Occupational Safety and Health Administration
<br /> Traffic(MHT's)included therein,in conformance with the Manual (OSHA)regulations-including,but not limited to the applicable
<br /> on Uniform Traffic Control Devices(MUTCD),the Colorado sections of 29 CFR Part 1910-Occupational Safety and Health
<br /> Supplement thereto adopted by the Commission pursuant to sections Standards and 29 CFR Part 1926 -Safety and Health Regulations
<br /> 42-4-104 and 42-4-105 CRS,the Department's standard for Construction.
<br /> specifications for temporary traffic control and the Department's
<br /> standard plans for signing-Standard Plans S 630-1 and S 630-2. b Personal protective equipment(PPE)(e.g.head protection,
<br /> The TCP shall include provisions for the passage of emergency footwear,high visibility apparel,safety glasses,hearing protection,
<br /> vehicles through die work zone,and shall conform to the respirators,gloves,etc.)shall be worn as appropriate for the work
<br /> requirements of the Americans with Disabilities Act. The TCP and being performed,and as specified in regulation. At a minimum,all
<br /> MHT's shall contain sufficient detail to demonstrate conformity workers in the SH ROW,except when in their vehicles,shall wear
<br /> with all applicable requirements. the following personal protective equipment:
<br /> C. The Permittee shall have a competent person at the work site at all 1) Head protection that complies with the ANSI Z89.I standard;
<br /> times in responsible charge of temporary traffic control. In
<br /> situations where the TCP goes beyond any Typical Application 2) At all construction sites or whenever there is danger of injury
<br /> shown in the MUTCD,or particularly dangerous roadway or traffic to feet,workers shall comply with OSHA's PPE requirements
<br /> conditions exist,the Department may require the Permittee to have for foot protection per 29 CFR 1910.136,1926.95,and
<br /> a Traffic Control Supervisor(TCS)develop or approve the TCP or 1926.96. If required,such footwear shall meet the
<br /> to have a TCS on-site during work. The TCS shall be certified as a requirements of ANSI Z41;
<br /> worksite traffic supervisor by either the American Traffic Safety
<br /> Services Association(ATSSA)or the Colorado Contractors 3) High visibility apparel,which shall,at a minimum comply
<br /> Association(CCA),and shall have a current CDOT flaggers' with the Class 2 specifications of the ANSIASEA 107standard.
<br /> certification card. The TCS shall be responsible for the planning, Class 3 apparel shall be considered for use at night or in
<br /> preparation,coordination,implementation,and inspection of the particularly hazardous situations.
<br /> TCP
<br />
|