Laserfiche WebLink
Newpark Drilling Fluids,LLC 4a$0 <br /> 1311 Broadfield,Suite 600,Houston TX 77084 Newpark <br /> 24-Hour Health/Environmental Emergency Phone: 1-888-872-0050 Drilling, Fluids, L.L.C. <br /> MATERIAL SAFETY DATA SHEET <br /> NewSeal <br /> (All Grinds) <br /> MSDS No.NE 1079 Date Created: 9/28/04 Revised: 00/00/00 <br /> SECTION 1. GENERAL PRODUCT INFORMATION <br /> Trade Name: NewSeal <br /> Chemical Name: Calcined Carbon <br /> Chemical Formula: Proprietary <br /> NFPA Properties:Health: 1 Flammability:0 Reactivity:0 <br /> SECTION 2. COMPOSITION/INFORMATION ON INGREDIENTS <br /> Ingredient Name CAS No. Contents(%) <br /> Calcined Carbon 64743-05-01 100 <br /> SECTION 3. HAZARDS IDENTIFICATION <br /> Acute Effects: None <br /> Ingestion: Non-toxic. <br /> Eyes: Dust abrasive and irritating to the eyes. <br /> Skin: None <br /> Chronic Effects: IARC—not listed: OSHA—not listed: NTP—not listed <br /> Route of Entry: Inhalation,ingestion and eye contact. <br /> SECTION 4. FIRST AID MEASURES <br /> Eyes: Flush with large amounts of water for 15 minutes. Seek medical attention. <br /> Skin: Wash with soap and water. Remove contaminated clothing. <br /> Ingestion: Induce vomiting if victim is conscious. Seek medical attention. <br /> Inhalation: Move victim to fresh air. Perform CPR if breathing has stopped. Seek medical attention. <br /> SECTION 5. FIREFIGHTING MEASURES <br /> Autoignition Temperature: May burn if exposed to temperatures above 1290°F. <br /> Flash Point: No Data Available. <br /> Conditions to Avoid: Avoid contact with strong oxidizing agents,excessive heat and ignition sources. <br /> Extinguishing Media: Apply water spray,dry chemical,foam or carbon dioxide. <br /> Special Fire Fighting Procedures: None. Evacuate all unnecessary personnel. Wear appropriate safety <br /> equipment for fire conditions,including SCBA. <br /> SECTION 6. ACCIDENTAL RELEASE MEASURES <br /> Procedures for Clean-up: Wear suitable protective clothing. Spilled material may generate dust,therefore, <br /> water-wet the spilled material and/or use respiratory protective equipment. Collect the spilled material for re- <br /> use or disposal at a properly permitted disposal facility. After the cleanup,flush the spill area with water. <br /> SECTION 7. HANDLING AND STORAGE <br /> Handling Precautions: Handle in a well ventilated area. Avoid breathing dust. Wear appropriate protective <br /> clothing and equipment. Use proper engineering controls to minimize exposure to dust. Store in a dry,cool <br /> place. Do not store near oxidizing agents or ignition sources. <br /> Storage Precautions: THIS MATERIAL CONDUCTS ELECTRICITY. EXERCISE CAUTION WHEN <br /> HANDLING NEAR ELECTRICAL CIRCUITS. <br /> SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION <br /> Engineering Controls: Local exhaust and ventilation system is recommended if handled in a confined area. <br /> Eye/Face Protection: Use safety glasses with side shields. <br /> Skin Protection: Use long-sleeved clothing and gloves. <br /> Respiratory Protection: Use NIOSH/OSHA approved respirator for nuisance dust. <br /> Page 1 of 2 NewSeal <br />