Laserfiche WebLink
view,will be equipped with back-up alarms. <br /> -Mobile equipment shall be equipped with Toll-over-protection(OPS)anlor <br /> falling object protection structures(FOPS)as required by MSHA regulations. <br /> -All machinery shall be secured to ensure zero mechanical potential prior to work <br /> being performed on the macbinexy. <br /> -Equipment shall be maintained in safe condition.. <br /> -Inspect hydraulic and pneumatic hues and couplings daily. <br /> J.ELECTRICAL SAI+ETV <br /> -Electrical lock and tag procedures are to be used at all times. <br /> YL SAFE WORK IN ELEVATED AREAS <br /> -Fall Protection shall be a full body harness and shock-absorbing lanyard. <br /> -Wire rope lanyards are required for welding operations- <br /> -All personnel are to be tied off if working where a fall hazard exists. <br /> Q.HEALTH CONSIDERATIONS <br /> -Inhalation hazards shall be minimized at all tries through engineering and <br /> administrative controls. <br /> -Welding fumes. <br /> -Other health hazards,specific to this job.Plan for protecting and informing <br /> employees in the use of Polyurethane Foam.. <br /> P.ENVIRONMENTAL:LIQUJUD WASTES <br /> -Methods approved by State of Colorado shall be used to eliminate the possibility <br /> of water pollution caused by spills of materials and sedimentation run-off. <br /> -Methods approved by State of Colorado shall be used to prevent spill hazards at <br /> bulk storage areas for fuels, oils,or other fluids. <br /> -All used fluids will be drained into clearly marked DOT containers. <br /> -Under no circumstances will fluids be allowed to drain onto the ground. <br /> -Equipment fueling and service procedures will not be performed on topsoil- <br /> -EPA Prevention and Control Procedures are to be followed in the event of an <br />