Laserfiche WebLink
DGM Environmental Monitoring QAPP <br /> meet project quality objectives documented in the QAPP." <br /> The analyzing laboratory is expected to test sample batch QC sample result data for <br /> compliance with established acceptance criteria or control limits prior to reporting. <br /> Sample batch data associated with QC sample data that does not meet the <br /> predetermined acceptance criteria are considered to be qualified. Qualified data may <br /> not be considered fully useable. <br /> The DGM QAO determines if the data meets the general quality objectives of the QAPP <br /> and is therefore usable. This determination is based on his review of the analytical data <br /> packages including any qualifying statements made in the case narrative if present or <br /> exceedance of acceptance limits in the packet's QC report. If the general quality <br /> objectives of the QAPP are met, the QAO documents approval of the data packet for <br /> use with his initials and the date. Any inadequacies or qualifying statements shall also <br /> be recorded within the data packet in the appropriate location and initialed and dated by <br /> the person making the statement. It is the responsibility of the data user to review the <br /> data reported to him, to be familiar with the general quality objectives of the QAPP, and <br /> to determine if the QAPP's quality objectives compare with the quality objectives of the <br /> specific project for which the data user intends to use the reported data. <br /> Page 12 <br />