Laserfiche WebLink
In addition to the structure inspection, the representative will also assess the condition of any <br /> water wells within the established distance. If the well is accessible,this will include measuring <br /> the water level in the well and conducting flow rate testing. Flow rate testing consists of <br /> pumping the well for a minimum of 15 minutes to determine the production rate and water level. <br /> Water level measurements will not be performed if the well is not accessible. Flow rate testing <br /> will be performed if there is a spigot between the well and cistern/pressure tank. The surveyor <br /> will also collect a water quality sample. If the well production can be tested, then a sample to test <br /> water quality will be collected from the pumped flows of the well production test. <br /> The operator may work with the landowner to have the surveyor open the well for testing, and <br /> this work may include removing the pump from the well. Regardless of accessibility, a water <br /> quality sample will be collected from the spigot closest to the well and/or cistern. A minimum of <br /> I gallon of water will be discharged prior to collecting the sample. The water quality monitoring <br /> parameter list is based on Domestic Water Supply numeric standards established by the Colorado <br /> Department of Public Health and Environment(CDPHE). This list is included as Table 1. The <br /> water sample will be sent to an independent Colorado state certified lab that will test for water <br /> quality. <br /> Young Ranch Resource <br /> November 2020 3 { fAwickiandAssceixles rf.f. <br />