Laserfiche WebLink
SAFETY DATA SHEET <br /> AEROFLOAT®242 PROMOTER <br /> Revision Date 09/20/2019 <br /> - Wash nonrecoverable remainder with large amounts of water. <br /> Soak up with inert absorbent material and dispose of as hazardous waste. <br /> Decontaminate tools, equipment and personal protective equipment in a segregated area. <br /> Dispose of in accordance with local regulations. <br /> Never return spills in original containers for re-use. <br /> 6.4 Reference to other sections <br /> - 7. HANDLING AND STORAGE <br /> - 8. EXPOSURE CONTROLS/PERSONAL PROTECTION <br /> - 13. DISPOSAL CONSIDERATIONS <br /> SECTION 7: Handling and storage <br /> 7.1 Precautions for safe handling <br /> - Large quantities of undiluted product should not be mixed with acids, since evolution of toxic and flammable <br /> hydrogen sulfide could result. In particular, precautions must be taken to avoid the accidental discharge of large <br /> volumes of the product in acid storage tanks or any tank or containment containing acidic materials.This precaution <br /> does not, of course, apply to addition of this reagent to flotation pulps in amounts customarily used in flotation, <br /> where the reagent amounts are small and instantly diluted to concentrations well below the solubility limits. <br /> Hygiene measures <br /> - Handle in accordance with good industrial hygiene and safety practice. <br /> - Wash hands before breaks and at the end of workday. <br /> - When using do not eat, drink or smoke. <br /> - Eye wash bottles or eye wash stations in compliance with applicable standards. <br /> - Ensure that eyewash stations and safety showers are close to the workstation location. <br /> 7.2 Conditions for safe storage, including any incompatibilities <br /> Requirements for storage rooms and vessels <br /> Recommended storage temperature: 32-95°F(0-35°C) <br /> - To guarantee the quality and properties of the product keep according to Storage temperature and conditions. <br /> 7.3 Specific end use(s) <br /> - no data available <br /> SECTION 8: Exposure controls/personal protection <br /> Introductory Remarks:These recommendations provide general guidance for handling this product. Because specific work <br /> environments and material handling practices vary, safety procedures should be developed for each intended application.Assistance <br /> with selection, use and maintenance of worker protection equipment is generally available from equipment manufacturers. <br /> 8.1 Control parameters <br /> Components with workplace occupational exposure limits <br /> Components Value type Value Basis <br /> Phenol, methyl- TWA 20 mg/m3 American Conference of Governmental <br /> Industrial Hygienists <br /> Form of exposure: Inhalable fraction and vapor <br /> Danger of cutaneous absorption <br /> PRC090072770 <br /> Version :2.00 / US(Z8) <br /> 6/20 <br />