Laserfiche WebLink
To: Mr. Peter Hays <br /> Date: October 8,2021 <br /> Page 3 <br /> 6.4.1 EXHIBIT A - LEGAL DESCRIPTION <br /> Comment 5 <br /> Rule 6.4.1(1) states the legal description shall be by, township, range and section, to at <br /> least the nearest quarter-quarter section. The Applicant provided the legal description to <br /> the nearest quarter section only in Exhibit A for the three (3)parcels. Please provide the <br /> legal description to the nearest quarter-quarter section as required by Rule 6.4.1 in Exhibit <br /> A. <br /> Response 5 <br /> The legal description provided is sub-quarter-quarter-section scale as it includes <br /> descriptions of very small parcels of land removed from the entire 1/4 section. To match <br /> Rule 6.4.1(1)more closely,we wrote an updated description of the property inclusion area <br /> in the form of a metes and bounds and added it to the legal description provided. <br /> EXHIBIT C - PRE-MINING AND MINING PLAN MAPS OF <br /> AFFECTED AREA <br /> Comment 6 <br /> The Applicant submitted Mining Plan Maps (Exhibits C-1 through C-16) labeled as <br /> "drafts". The Division does not review draft copies of application exhibits. Please provide <br /> final copies of the Exhibit C maps for Division review. <br /> Response 6 <br /> We have removed draft from the drawings. <br /> Comment 7 <br /> The Exhibit C maps must be prepared and signed by a registered land surveyor, <br /> professional engineer or other qualified person pursuant to Rule 6.2.1(2)(b). Please <br /> provide signed copies of the Exhibit C maps. <br /> Response 7 <br /> We typically stamp engineering drawings after respective agencies review to incorporate <br /> changes into a final form and to certify the changes are accepted by the engineer and <br /> agency. To meet the rule requirement, we have provided professional engineer's seal as <br /> requested on pertinent engineering drawings. <br /> 20211006_Response to DRMS(AutoRecovered).docx T E L E S T O <br />