Laserfiche WebLink
AFL INDUSTRIES,INC. <br /> RIVIERA BEACH,FLORIDA <br /> SERVICE INSTALLATION INSTRUCTIONS PAGE 5 OF 6 <br /> MANUAL <br /> PRODUCT: ROTARY PIPE SKIMMER <br /> MODEL: RPS <br /> Dimension Chart <br /> Dim. 2"0 Y0 64 <br /> A 5" 6" 10" <br /> B 1/2" V V + <br /> C 2" 2" 4" <br /> D 5 1/2" 8" 1101, — — <br /> E 3/4" 3/4" 3/4" <br /> F 11/2" 13/4" 13/4" <br /> G 2" 2 7/8" 4 7/8" �A.. <br /> H 3" 4" 3 1/4" <br /> J 1/4" 1/4" 1/4" <br /> INSTALLATION(continued) <br /> 5. If skimmer pipe, Item 3,was shipped with adjusting handle,Item 5,remove handle. <br /> 6. Mark skimmer pipe and outlet pipe ends to indicate compression coupling and molded unit skimmer engagement,and <br /> Fig.6.0 for engagement on outlet pipe. <br /> 7. Slide compression coupling on the outlet end of skimmer pipe. <br /> 8. Slide the capped end of skimmer pipe into trunion. <br /> 9. Slide compression coupling on the outlet pipe. Check skimmer pipe engagement on trunion,adjust by moving the pipe <br /> horizontally. <br /> 10. Hand tighten compression coupling on outlet of skimmer pipe and oil outlet pipe,check engagement on both sides. <br /> H. Install skimmer adjusting handle,Item 5. <br /> 12. Level skimmer assembly. <br /> 13. Tighten nuts on mounting bracket studs and tighten compression nuts on compression coupling. <br /> NOTE: Do not overtighten,the skimmer pipe should rotate but not without some drag. <br /> C. Skimmer Removal and Disassembly <br /> 1. To remove and/or replace skimmer,follow the above instructions in reverse order. <br /> SUPERSEDES: AUG'81 1-O-M: 7.13 <br />